#!/usr/bin/perl

#======================================================================

#                    L I S T B T 

#                    doc: Sat Jan 18 18:41:49 2003

#                    (c) 2003 A.M. Thurnherr

#======================================================================

# Extract Bottom-Track Data

# NOTE: NO SOUND-SPEED CORRECTION APPLIED YET!!!

# HISTORY:

#	Jan 18, 2003: - created

#	Jan 23, 2003: - added magnetic declination

#	Jan 25, 2003: - continued construction

#	Feb 11, 2003: - finally made it work

#	Feb 12, 2003: - added default profile output

#	Feb 13, 2003: - corrected raw output

#	Feb 14, 2003: - added errors if instrument-BT filters are more strict

#					than command-line values

#	Feb 18, 2003: - removed -d dependency on -W

#	Mar  3, 2003: - added -C)ompass correction

#	Mar 10, 2003: - added -f)orce to allow visbeck-style post processing

#	Mar 16, 2003: - added range comment

#	Feb 26, 2004: - added Earth-coordinate support

#	Feb 27, 2004: - made water-track calculation conditional (-E || -B)

#	Mar  9, 2004: - added magnetic_declination to %PARAMs

#	Apr  1, 2004: - added CTD u/v stats to %PARAMs

#	Apr  2, 2004: - added CTD_msf (mean square fluctuation) stat

#	Apr  3, 2004: - BUG: CTD vels were repeated for stats

#				  - removed non-ANTS option

#	Nov  8, 2005: - UNIXTIME => UNIX_TIME

#				  - adapted to new binary read library

#				  - output editing statistics

#	Aug 15, 2006: - added -b

#	Aug 25, 2006: - fiddled

#	Sep 19, 2007: - adapted to new [RDI_BB_Read.pl] (not tested)

#	Nov  1, 2008: - BUG: sig(u) was reported instead of sig(v)

#	Jul 30, 2009: - NaN => nan

# NOTES:

#	- the RDI BT data contains ranges that are greater than the

#	  WT ping ranges. I don't know if those data are valid!

#	- there is a fair bit of heuristic used, especially in the 

#	  reference-layer calculation

#	- depth-correction (-m) is highly recommended because it allows

#	  much better bad-BT detection and it is required for a valid

#	  comparison with LADCP profiles

#	- the criterion for bottom-interference of the water-track data

#	  is derived from Firing's [merge.c] (adding 1.5 bin lengths to

#	  the calculated range), modified by taking the real beam angle

#	  into account.

#	- from the RDI manuals it is not entirely clear whether the BT range

#	  is given in vertical or in along-beam meters; comparison with the 

#	  WT range (calculated from the bin with the maximum echo amplitude)

#	  shows that vertical meters are used

# NOTES on quality checks:

#	-a	minimum BT amplitude; setting this to 50 (RDI default is 30)

#		reduces the vertical range over which the bottom is detected but

#		not the quality of the bottom track data; therefore, this should

#		probably not be used.

#	-c	minimum BT correlation; the RDI default for this parameter is 220,

#		which seems to work fine.

#	-e	max error velocity (BT & WT); this is primarily used for detecting

#		good BT data, i.e. it should be set to a small value (Firing uses

#		0.1m/s in merge); if too small a value is chosen too many good

#		data are discarded; note that the same error-velocity criterion

#		is used to separate good from bad data when mean profiles are

#		constructed.

#	-w	max difference between reference-layer w and BT w; this is a

#		powerful criterion for determining good BT data; I like a value of

#		0.03 m/s.

#	-d	when the depth is corrected (-m) the...

$0 =~ m{(.*)/[^/]+};

require "$1/RDI_BB_Read.pl";

require "$1/RDI_Coords.pl";

require "$1/RDI_Utils.pl";

use Getopt::Std;

$USAGE = "$0 @ARGV";

die("Usage: $0 " .

	"[use -b)ins <1st,last>] " .

	"[write -R)aw data] [write -B)T data] " .

    "[write -E)nsembles <pref>] [-F)ilter ensembles <script>] " .

    "[-C)ompass correction <amp/phase/bias>] " .

	"[-w) <max-diff|0.03>] [-a)mp <min|30>] [-e)rr-vel <max|0.05>] " .

	"[-c)orrelation <min|220>] " .

	"[-W)ater <depth> [allowed -d)epth-diff <maxdiff|20>]] " .

	"[-f)orce (no setup tests)] " .

	"[-M)agnetic <declination>] " .

	"<RDI file>\n")

	unless (&getopts("BC:E:F:M:RW:a:b:c:d:e:fw:") && @ARGV == 1);

print(STDERR "WARNING: magnetic declination not set!\n")

	unless defined($opt_M);

$opt_c = 220  unless defined($opt_c);				# defaults

$opt_a = 30   unless defined($opt_a);

$opt_e = 0.05 unless defined($opt_e);

$opt_w = 0.03 unless defined($opt_w);

$opt_d = 20   unless defined($opt_d);

if (defined($opt_C)) {								# compass correction

	($CC_amp,$CC_phase,$CC_bias) = split('/',$opt_C);

	die("$0: can't decode -C$opt_C\n")

		unless defined($CC_bias);

}

unless ($opt_f) {									# check BT setup

	readHeader($ARGV[0],\%dta);		

	die("$0: minimum instrument BT correlation ($dta{BT_MIN_CORRELATION}) " .

		"too large for selected criterion (-c $opt_c) --- use -f to override\n")

			if ($dta{BT_MIN_CORRELATION} > $opt_c);

	die("$0: minimum instrument BT amplitude ($dta{BT_MIN_EVAL_AMPLITUDE}) " .

		"too large for selected criterion (-a $opt_a) --- use -f to override\n")

			if ($dta{BT_MIN_EVAL_AMPLITUDE} > $opt_a);

	die("$0: maximum instrument BT error velocity ($dta{BT_MAX_ERROR_VELOCITY}) " .

		"too small for selected criterion (-e $opt_e) --- use -f to override\n")

}

require $opt_F if defined($opt_F);					# load filter

print(STDERR "reading $ARGV[0]...");

readData($ARGV[0],\%dta);							# read data

print(STDERR "done\n");

$dta{HEADING_BIAS} = -$opt_M;						# magnetic declination

ensure_BT_RANGE(\%dta);								# make sure they're there

$firstBin = $lastBin = '*';							# bins to use

($firstBin,$lastBin) = split(',',$opt_b)

	if defined($opt_b);

$firstBin = 1 			if ($firstBin eq '*');

$lastBin = $dta{N_BINS} if ($lastBin  eq '*');

$firstBin--; $lastBin--;

die("$ARGV[0]: not enough bins for ref layer\n")

	unless ($lastBin-$firstBin >= 6);

if ($dta{BEAM_COORDINATES}) {						# coords used

	$beamCoords = 1;

} elsif (!$dta{EARTH_COORDINATES}) {

	die("$ARGV[0]: only beam and earth coordinates implemented so far\n");

}

#======================================================================

# Calculate reference-layer w

#======================================================================

sub w($)

{

	my($ens) = @_;

	my($i,$n,@v,$w);

	for (my($b)=$firstBin; $b<=$lastBin; $b++) {

		if ($beamCoords) {

			next if ($dta{ENSEMBLE}[$ens]->{PERCENT_GOOD}[$b][0] < 100 ||

					 $dta{ENSEMBLE}[$ens]->{PERCENT_GOOD}[$b][1] < 100 ||

					 $dta{ENSEMBLE}[$ens]->{PERCENT_GOOD}[$b][2] < 100 ||

					 $dta{ENSEMBLE}[$ens]->{PERCENT_GOOD}[$b][3] < 100);

			@v = velInstrumentToEarth(\%dta,$ens,

					velBeamToInstrument(\%dta,

	                    @{$dta{ENSEMBLE}[$ens]->{VELOCITY}[$b]}));

	    } else {

			next if ($dta{ENSEMBLE}[$ens]->{PERCENT_GOOD}[$b][0] > 0 ||

					 $dta{ENSEMBLE}[$ens]->{PERCENT_GOOD}[$b][1] > 0 ||

					 $dta{ENSEMBLE}[$ens]->{PERCENT_GOOD}[$b][2] > 0 ||

					 $dta{ENSEMBLE}[$ens]->{PERCENT_GOOD}[$b][3] < 100);

			@v = velApplyHdgBias(\%dta,$ens,

					@{$dta{ENSEMBLE}[$ens]->{VELOCITY}[$b]});

	    }

		next unless (defined($v[3]) && abs($v[3]) <= $opt_e);

		$w += $v[2]; $n++;

	}

#	printf(STDERR "$ens $n %.3f\n",$n>=1?$w/$n:-999);

	return $n>=2 ? $w/$n : undef;

}

#======================================================================

# Dump raw BT data from one ensemble

#======================================================================

sub dumpRaw($)

{

	my($e) = @_;

	unless ($headerDone) {

		print("#ANTS# [] $USAGE\n");

		print("#ANTS#PARAMS# RDI_file{$ARGV[0]}\n");

		print("#ANTS#FIELDS# {ens} {range1} {range2} {range3} {range4} " .

				"{beamvel1} {beamvel2} {beamvel3} {beamvel4} {cor1} " .

				"{cor2} {cor3} {cor4} {amp1} {amp2} {amp3} {amp4}\n");

		$headerDone = 1;

	}

	printf("%d %f %f %f %f %f %f %f %f %d %d %d %d %d %d %d %d\n",

			$dta{ENSEMBLE}[$e]->{NUMBER},

			$dta{ENSEMBLE}[$e]->{BT_RANGE}[0],

			$dta{ENSEMBLE}[$e]->{BT_RANGE}[1],

			$dta{ENSEMBLE}[$e]->{BT_RANGE}[2],

			$dta{ENSEMBLE}[$e]->{BT_RANGE}[3],

			$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[0],

			$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[1],

			$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[2],

			$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[3],

			$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[0],

			$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[1],

			$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[2],

			$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[3],

			$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[0],

			$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[1],

			$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[2],

			$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[3]

	);

}

#======================================================================

# Dump processed BT data from one ensemble 

#======================================================================

sub dumpBT($)

{

	my($e) = @_;

	unless ($headerDone) {

		print("#ANTS# [] $USAGE\n");

		printf("#ANTS#PARAMS# RDI_file{$ARGV[0]} bottom_time{%.1f}\n",

				$dta{ENSEMBLE}[$maxz_e]->{ELAPSED});

		print("#ANTS#FIELDS# {ens} {unix_time} {time} {depth} {BT_range} " .

				"{WT_range} {u} {v} {w} {e} {w_ref} {corr} {amp}\n");

		$headerDone = 1;

	}

	printf("%d %.2f %.2f %.1f %.1f %.1f %.4f %.4f %.4f %.4f %.4f %.1f %.1f\n", 

		$dta{ENSEMBLE}[$e]->{NUMBER},

		$dta{ENSEMBLE}[$e]->{UNIX_TIME},

		$dta{ENSEMBLE}[$e]->{ELAPSED},

		$dta{ENSEMBLE}[$e]->{DEPTH},

		$dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE},

		$dta{ENSEMBLE}[$e]->{WT_MEAN_RANGE},

		@{$dta{ENSEMBLE}[$e]->{BT_VELOCITY}},

		$dta{ENSEMBLE}[$e]->{W_REF},

		$dta{ENSEMBLE}[$e]->{BT_MEAN_CORRELATION},

		$dta{ENSEMBLE}[$e]->{BT_MEAN_EVAL_AMPLITUDE}

	);

}

#======================================================================

# Dump a single ensemble with valid BT data to separate file

#======================================================================

sub dumpEns(@)										# write profile

{

	my($e) = @_;

	my($b,$i);

	open(P,">$opt_E.$e") || die("$opt_E.$e: $!\n");

	print(P "#ANTS#PARAMS# " .

			"depth{$dta{ENSEMBLE}[$e]->{DEPTH}} " .

			"range{$dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE}} " .

			"wt_range{$dta{ENSEMBLE}[$e]->{WT_MEAN_RANGE}} " .

			"w_ref{$dta{ENSEMBLE}[$e]->{W_REF}} " .

			"BT_u{$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[0]} " .

			"BT_v{$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[1]} " .

			"BT_w{$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[2]} " .

			"BT_e{$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[3]} " .

			"BT_cor1{$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[0]} " .

			"BT_cor2{$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[1]} " .

			"BT_cor3{$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[2]} " .

			"BT_cor4{$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[3]} " .

			"BT_amp1{$dta{ENSEMBLE}[$e]->{BT_AMPLITUDE}[0]} " .

			"BT_amp2{$dta{ENSEMBLE}[$e]->{BT_AMPLITUDE}[1]} " .

			"BT_amp3{$dta{ENSEMBLE}[$e]->{BT_AMPLITUDE}[2]} " .

			"BT_amp4{$dta{ENSEMBLE}[$e]->{BT_AMPLITUDE}[3]} " .

			"BTFWT_u{$dta{ENSEMBLE}[$e]->{BTFWT_VELOCITY}[0]} " .

			"BTFWT_v{$dta{ENSEMBLE}[$e]->{BTFWT_VELOCITY}[1]} " .

			"BTFWT_w{$dta{ENSEMBLE}[$e]->{BTFWT_VELOCITY}[2]} " .

			"\n"

	);

	print(P "#ANTS#FIELDS# " .

			"{depth} {hab} {u} {v} {w} {e} {cor1} {cor2} {cor3} {cor4} " .

			"{amp1} {amp2} {amp3} {amp4} {pcg1} {pcg2} {pcg3} {pcg4}\n"

	);

	my($slc) = (1-cos(rad($dta{BEAM_ANGLE})))*$dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE}

				+ 1.5*$dta{BIN_LENGTH};		# side-lobe contamination

	for ($b=$firstBin; $b<=$lastBin; $b++) {

		next unless (defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][0]) &&

					 defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][1]) &&

					 defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][2]) &&

					 defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][3]));

		my($dz) = $dta{DISTANCE_TO_BIN1_CENTER} + $b*$dta{BIN_LENGTH};

		last if ($dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE}-$dz <= $slc);

		my(@v) = $beamCoords

			   ? velInstrumentToEarth(\%dta,$e,

					velBeamToInstrument(\%dta,

						@{$dta{ENSEMBLE}[$e]->{VELOCITY}[$b]}))

			   : velApplyHdgBias(\%dta,$e,@{$dta{ENSEMBLE}[$e]->{VELOCITY}[$b]});

		next unless defined($v[0]);

		next if (abs($v[3]) > $opt_e ||

				 abs($v[2]-$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[2]) > 0.1);

		$v[0] -= $dta{ENSEMBLE}[$e]->{BT_VELOCITY}[0];

		$v[1] -= $dta{ENSEMBLE}[$e]->{BT_VELOCITY}[1];

		my(@out) = (

			$dta{ENSEMBLE}[$e]->{DEPTH}+$dz,

			$dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE}-$dz,

			$v[0],$v[1],$v[2],$v[3],

			@{$dta{ENSEMBLE}[$e]->{CORRELATION}[$b]},

			@{$dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b]},

			@{$dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b]}

		);

		for ($i=0; $i<17; $i++) { $out[$i] = nan unless defined($out[$i]); }

		print(P "@out\n");

	}

	close(P);

}

#======================================================================

# Add Ensemble With Valid BT Data to Profile

#======================================================================

sub binEns($)

{

	my($e) = @_;

	my($slc) = (1-cos(rad($dta{BEAM_ANGLE})))*$dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE}

					+ 1.5*$dta{BIN_LENGTH};     # side-lobe contamination

	for (my($b)=$firstBin; $b<=$lastBin; $b++) {

		next unless (defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][0]) &&

					 defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][1]) &&

					 defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][2]) &&

					 defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][3]));

		my($dz) = $dta{DISTANCE_TO_BIN1_CENTER} + $b*$dta{BIN_LENGTH};

		last if ($dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE}-$dz <= $slc);

		my(@v) = $beamCoords

			   ? velInstrumentToEarth(\%dta,$e,

					velBeamToInstrument(\%dta,

						@{$dta{ENSEMBLE}[$e]->{VELOCITY}[$b]}))

			   : velApplyHdgBias(\%dta,$e,@{$dta{ENSEMBLE}[$e]->{VELOCITY}[$b]});

		next unless defined($v[0]);

		next if (abs($v[3]) > $opt_e ||

				 abs($v[2]-$dta{ENSEMBLE}[$e]->{BT_VELOCITY}[2]) > 0.1);

		$v[0] -= $dta{ENSEMBLE}[$e]->{BT_VELOCITY}[0];

		$v[1] -= $dta{ENSEMBLE}[$e]->{BT_VELOCITY}[1];

		my($bin) = int(($dta{ENSEMBLE}[$e]->{DEPTH}+$dz) / $dta{BIN_LENGTH});

		$minBin = $bin unless ($bin >= $minBin);

		$maxBin = $bin unless ($bin <= $maxBin);

		if (defined($BTn[$bin])) {

			my($f1) = $BTn[$bin] / ($BTn[$bin]+1);

			my($f2) = ($BTn[$bin]-1) / $BTn[$bin];

			$BTsigu[$bin] =

				$f2*$BTsigu[$bin] + $f1*($v[0]-$BTu[$bin])**2/$BTn[$bin];

			$BTsigv[$bin] =

				$f2*$BTsigv[$bin] + $f1*($v[1]-$BTv[$bin])**2/$BTn[$bin];

			$BTn[$bin]++;

			$BTu[$bin] = $f1*$BTu[$bin] + $v[0]/$BTn[$bin];

			$BTv[$bin] = $f1*$BTv[$bin] + $v[1]/$BTn[$bin];

		} else {

			$BTu[$bin] = $v[0];

			$BTv[$bin] = $v[1];

			$BTn[$bin] = 1;

		}

	}

}

#======================================================================

# Output Bottom-Referenced Profile

#======================================================================

sub dumpProf($$$)

{

	my($db,$wd,$md) = @_;

	my(@sum,@mean);

	for (my($i)=0; $i<=$#listCTDu; $i++) {			# CTD vel mean

		$sum[0] += $listCTDu[$i];

		$sum[1] += $listCTDv[$i];

	}

	@mean = ($sum[0]/@listCTDu,$sum[1]/@listCTDv);

	@sum = (0,0);									# stddev

	for (my($i)=0; $i<=$#listCTDu; $i++) {

		$sum[0] += ($listCTDu[$i]-$mean[0])**2;

		$sum[1] += ($listCTDv[$i]-$mean[1])**2;

	}

	@sigma = ($sum[0]/sqrt($#listCTDu),$sum[1]/sqrt($#listCTDv));

	@sum = (0,0);									# mean speed fluct

	for (my($i)=1; $i<=$#listCTDu; $i++) {			# also: list for median

		push(@cfluc,sqrt(($listCTDu[$i]-$listCTDu[$i-1])**2 +

					 	 ($listCTDv[$i]-$listCTDv[$i-1])**2));

		$sum[0] += $cfluc[$#cfluc];

	}

	printf("#ANTS#PARAMS# LADCP_depth_bias{%.1f} water_depth{%.1f} magnetic_declination{%.1f}\n",

			$db,$wd,$md);

	printf("#ANTS#PARAMS# CTD_u{%.3f} CTD_v{%.3f} CTD_sig_u{%.3f} CTD_sig_v{%.3f} CTD_mean_cfluc{%.4f} CTD_median_cfluc{%.4f}\n",

			@mean,@sigma,$sum[0]/$#listCTDu,(sort{$a<=>$b}@cfluc)[@cfluc/2]);

	printf("#ANTS#PARAMS# good_ens{$good}\n");

	print("#ANTS#FIELDS# {depth} {u} {v} {sig_u} {sig_v} {n_data}\n");

	for (my($bin)=$minBin; $bin<=$maxBin; $bin++) {

		next unless defined($BTu[$bin]);

		printf("%d %.3f %.3f %.3f %.3f %d\n",

			($bin+0.5)*$dta{BIN_LENGTH},

			$BTu[$bin],$BTv[$bin],

			sqrt($BTsigu[$bin]),sqrt($BTsigv[$bin]),

			$BTn[$bin]);

	}

}

#======================================================================

# STEP 1: Calculate Depth (integrate w)

#======================================================================

for ($e=0; $e<=$#{$dta{ENSEMBLE}}; $e++) {

	checkEnsemble(\%dta,$e);

	$dta{ENSEMBLE}[$e]->{W_REF} = w($e);

	next unless (defined($start_e) ||

				 defined($dta{ENSEMBLE}[$e]->{W_REF}));

	$start_e = $e unless defined($start_e);

	$end_e = $e if defined($dta{ENSEMBLE}[$e]->{W_REF});

	$lasttime = $curtime;

	$curtime = $dta{ENSEMBLE}[$e]->{UNIX_TIME};

	$dta{ENSEMBLE}[$e]->{ELAPSED} =

		$curtime - $dta{ENSEMBLE}[$start_e]->{UNIX_TIME};

	filterEnsemble(\%dta,$e)

		if (defined($opt_F) &&

			$dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[0][3] > 0);

	$z += $dta{ENSEMBLE}[$e]->{W_REF} *

			(defined($lasttime) ? ($curtime - $lasttime) : 0);

	$maxz_e=$e,$maxz = $z unless ($z < $maxz);

	$dta{ENSEMBLE}[$e]->{DEPTH} = $z;

}

unless ($opt_R) {

	($w_depth,$swd) = find_seabed(\%dta,$maxz_e,$beamCoords);

	die("$0: can't determine water depth (sigma = $swd)\n")

		unless (defined($w_depth) && $swd < 10);

	if (defined($opt_W)) {						# adjust depth

		$zbias = $w_depth - $opt_W; $w_depth = $opt_W;

		for ($e=$start_e; $e<=$end_e; $e++) {

			$dta{ENSEMBLE}[$e]->{DEPTH} -= $zbias;

		}

	}

}

# print(STDERR "maxz = $maxz, w_depth = $w_depth\n");

#======================================================================

# STEP 2: Process BT Data

#======================================================================

for ($e=$start_e; $e<=$end_e; $e++) {

	next unless ($dta{ENSEMBLE}[$e]->{BT_RANGE}[0] &&	# BT data available

				 $dta{ENSEMBLE}[$e]->{BT_RANGE}[1] &&

				 $dta{ENSEMBLE}[$e]->{BT_RANGE}[2] &&

				 $dta{ENSEMBLE}[$e]->{BT_RANGE}[3]);

#	die("$0: don't know what to do with non-zero %-good and " .

#		"signal-strength values at ensemble " .

#		"#$dta{ENSEMBLE}[$e]->{NUMBER}\n")

#		if ($dta{ENSEMBLE}[$e]->{BT_PERCENT_GOOD}[0] ||

#			$dta{ENSEMBLE}[$e]->{BT_PERCENT_GOOD}[1] ||

#			$dta{ENSEMBLE}[$e]->{BT_PERCENT_GOOD}[2] ||

#			$dta{ENSEMBLE}[$e]->{BT_PERCENT_GOOD}[3] ||

#			$dta{ENSEMBLE}[$e]->{BT_SIGNAL_STRENGHT}[0] ||

#			$dta{ENSEMBLE}[$e]->{BT_SIGNAL_STRENGHT}[1] ||

#			$dta{ENSEMBLE}[$e]->{BT_SIGNAL_STRENGHT}[2] ||

#			$dta{ENSEMBLE}[$e]->{BT_SIGNAL_STRENGHT}[3]);

	if ($opt_R) {										# dump raw data

		dumpRaw($e);

		next;

	}

	$dta{ENSEMBLE}[$e]->{HEADING} -=					# compass correction

		$CC_amp * sin(rad($dta{ENSEMBLE}[$e]->{HEADING} - $CC_phase))

			+ $CC_bias

				if defined($opt_C);

	@{$dta{ENSEMBLE}[$e]->{BT_VELOCITY}} = $beamCoords	# xform BT vel

	    ? velInstrumentToEarth(\%dta,$e,

			velBeamToInstrument(\%dta,@{$dta{ENSEMBLE}[$e]->{BT_VELOCITY}}))

		: velApplyHdgBias(\%dta,$e,@{$dta{ENSEMBLE}[$e]->{BT_VELOCITY}});

 	$dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE} =				# mean vals

		$dta{ENSEMBLE}[$e]->{BT_RANGE}[0]/4 +

		$dta{ENSEMBLE}[$e]->{BT_RANGE}[1]/4 +

		$dta{ENSEMBLE}[$e]->{BT_RANGE}[2]/4 +

		$dta{ENSEMBLE}[$e]->{BT_RANGE}[3]/4;

	$dta{ENSEMBLE}[$e]->{BT_MEAN_CORRELATION} =

		$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[0]/4 +

		$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[1]/4 +

		$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[2]/4 +

		$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[3]/4;

	$dta{ENSEMBLE}[$e]->{BT_MEAN_EVAL_AMPLITUDE} =

		$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[0]/4 +

		$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[1]/4 +

		$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[2]/4 +

		$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[3]/4;

#	next												# could add this

#		if ($dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE} < 50);

	$bad_amp++,next

		if ($dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[0] < $opt_a ||

			$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[1] < $opt_a ||

			$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[2] < $opt_a ||

			$dta{ENSEMBLE}[$e]->{BT_EVAL_AMPLITUDE}[3] < $opt_a);

	$bad_corr++,next

		if ($dta{ENSEMBLE}[$e]->{BT_CORRELATION}[0] < $opt_c ||

			$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[1] < $opt_c ||

			$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[2] < $opt_c ||

			$dta{ENSEMBLE}[$e]->{BT_CORRELATION}[3] < $opt_c);

	$bad_w_ref++,next									# quality checks

		if (abs($dta{ENSEMBLE}[$e]->{BT_VELOCITY}[2] -

				$dta{ENSEMBLE}[$e]->{W_REF}) > $opt_w);

	$bad_e_vel++,next

		if (abs($dta{ENSEMBLE}[$e]->{BT_VELOCITY}[3]) > $opt_e);

	$bad_depth++,next

		if (abs($dta{ENSEMBLE}[$e]->{BT_MEAN_RANGE} +

				$dta{ENSEMBLE}[$e]->{DEPTH} - $w_depth) > $opt_d);