#!/usr/bin/perl

#======================================================================

#                    M E A N P R O F 

#                    doc: Fri Feb 22 08:40:18 2008

#                    (c) 2008 A.M. Thurnherr

#======================================================================

# extract time-averaged mean profile from ADCP data

# HISTORY:

#	Feb 22, 2008: - created from [listBins]

#	Mar 16, 2016: - adapted to new Getopt library

# Soundspeed Correction:

#	- applied as described in the RDI coord-trans manual

#	- sound-speed variation over range is ignored (valid for small gradients)

#	=> - same simple correction for all velocity components

#	   - simple correction for cell depths

use Getopt::Std;

$0 =~ m{(.*/)[^/]+};

require "$1RDI_BB_Read.pl";

require "$1RDI_Coords.pl";

require "$1RDI_Utils.pl";

die("Usage: $0 [-r)ange <first_ens,last_ens>] " .

			  "[-Q)uiet (stats only)] " .

			  "[-S)oundspeed correction <salin|*,temp|*,depth|*> " .

		 	  "[require -4)-beam solutions] [-d)iscard <beam#>] " .

		 	  "[-%)good <min>] " .

		 	  "[output -b)eam coordinates] " .

			  "[-M)agnetic <declination>] " .

			  "[-D)epth <depth>] " .

			  "<RDI file>\n")

	unless (&getopts("4bd:D:M:p:r:QS:") && @ARGV == 1);

die("$0: -4 and -d are mutually exclusive\n")

	if ($opt_4 && defined($opt_d));

die("$0: -p and -b are mutually exclusive\n")

	if ($opt_b && defined($opt_p));

$opt_p = 0 unless defined($opt_p);

$RDI_Coords::minValidVels = 4 if ($opt_4);			# no 3-beam solutions

print(STDERR "WARNING: magnetic declination not set!\n")

	unless defined($opt_M) || defined($opt_b);

$ifn = $ARGV[0];

($first_ens,$last_ens) = split(',',$opt_r)

	if defined($opt_r);

($SS_salin,$SS_temp,$SS_depth) = split(',',$opt_S)

	if defined($opt_S);

die("$0: Cannot do variable soundspeed correction (implementation restriction)\n")

	if ($SS_salin eq '*' || $SS_temp eq '*' || $SS_depth eq '*');

#----------------------------------------------------------------------

# Read & Check Data, Transform Velocities

#----------------------------------------------------------------------

$P{RDI_file} = $ifn;

$P{mag_decl} = $opt_M if defined($opt_M);

print(STDERR "reading $ifn: ");

readData($ifn,\%dta);

printf(STDERR "%d complete ensembles.\n",scalar(@{$dta{ENSEMBLE}}));

$dta{HEADING_BIAS} = -$opt_M;						# magnetic declination

if ($dta{BEAM_COORDINATES}) {						# coords

	$beamCoords = 1;

} else {

	die("$0: -b requires input in beam coordinates\n")

		if ($opt_b);

	die("$ifn: only beam and earth coordinates implemented so far\n")

		if (!$dta{EARTH_COORDINATES});

}

for (my($b)=0; $b<$dta{N_BINS}; $b++) {				# calc dz

	$dz[$b] = $dta{DISTANCE_TO_BIN1_CENTER} + $b*$dta{BIN_LENGTH};

}

$lastGoodBin = 0;

for ($e=0; $e<=$#{$dta{ENSEMBLE}}; $e++) {			# check/transform velocities

	next if (defined($first_ens) &&

			 $dta{ENSEMBLE}[$e]->{NUMBER} < $first_ens);

	$P{first_ens} = $dta{ENSEMBLE}[$e]->{NUMBER},$fe = $e

		unless defined($P{first_ens});

	last if (defined($last_ens) &&

			 $dta{ENSEMBLE}[$e]->{NUMBER} > $last_ens);

	$P{last_ens} = $dta{ENSEMBLE}[$e]->{NUMBER};

	$le = $e;

	die("3-beams used in ensemble #$dta{ENSEMBLE}[$e]->{NUMBER}\n")

		if ($dta{ENSEMBLE}[$e]->{N_BEAMS_USED} < 4);

	die("BIT error in ensemble $dta{ENSEMBLE}[$e]->{NUMBER}\n")

		if defined($dta{ENSEMBLE}[$e]->{BUILT_IN_TEST_ERROR});

	die("Low gain in ensemble #$dta{ENSEMBLE}[$e]->{NUMBER}\n")

        if ($dta{ENSEMBLE}[$e]->{LOW_GAIN});

	for (my($b)=0; $b<$dta{N_BINS}; $b++) {

		if (defined($opt_d)) {

			undef($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][$opt_d-1]);

			undef($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][$opt_d-1]);

		}

		for (my($i)=0; $i<4; $i++) {

			if ($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][$i] < $opt_p) {

				undef($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][$i]);

				undef($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][$i]);

			}

        }

		@{$dta{ENSEMBLE}[$e]->{VELOCITY}[$b]} = $beamCoords

			? velInstrumentToEarth(\%dta,$e,

				  velBeamToInstrument(\%dta,@{$dta{ENSEMBLE}[$e]->{VELOCITY}[$b]})

			  )

			: velApplyHdgBias(\%dta,$e,@{$dta{ENSEMBLE}[$e]->{VELOCITY}[$b]})

				unless ($opt_b);

		$sum_corr1[$b] += $dta{ENSEMBLE}[$e]->{CORRELATION}[$b][0];

		$sum_corr2[$b] += $dta{ENSEMBLE}[$e]->{CORRELATION}[$b][1];

		$sum_corr3[$b] += $dta{ENSEMBLE}[$e]->{CORRELATION}[$b][2];

		$sum_corr4[$b] += $dta{ENSEMBLE}[$e]->{CORRELATION}[$b][3];

		$sum_amp1[$b] += $dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b][0];

		$sum_amp2[$b] += $dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b][1];

		$sum_amp3[$b] += $dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b][2];

		$sum_amp4[$b] += $dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b][3];

		unless (defined($dta{ENSEMBLE}[$e]->{VELOCITY}[$b][0])) {

			undef(@{$dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b]});

			next;

		}

		$dta{ENSEMBLE}[$e]->{THREE_BEAM}[$b] = $RDI_Coords::threeBeamFlag;

		$three_beam[$b] += $RDI_Coords::threeBeamFlag;

		$dta{ENSEMBLE}[$e]->{GOOD_VEL}[$b] = 1;

		$good_vels[$b]++; 

		$lastGoodBin = $b if ($b > $lastGoodBin);

		$firstGoodEns = $e unless defined($firstGoodEns);

		$lastGoodEns = $e;

		$sum_u[$b] += $dta{ENSEMBLE}[$e]->{VELOCITY}[$b][0];

		$sum_v[$b] += $dta{ENSEMBLE}[$e]->{VELOCITY}[$b][1];

		$sum_w[$b] += $dta{ENSEMBLE}[$e]->{VELOCITY}[$b][2];

		$sum_e[$b] += $dta{ENSEMBLE}[$e]->{VELOCITY}[$b][3]

			unless ($RDI_Coords::threeBeamFlag);

		$sum_pcg1[$b] += $dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][0];

		$n_pcg1[$b]++ if defined($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][0]);

		$sum_pcg2[$b] += $dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][1];

		$n_pcg2[$b]++ if defined($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][1]);

		$sum_pcg3[$b] += $dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][2];

		$n_pcg3[$b]++ if defined($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][2]);

		$sum_pcg4[$b] += $dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][3];

		$n_pcg4[$b]++ if defined($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][3]);

    }

}

unless (defined($opt_r)) {

	$fe = $firstGoodEns;

	$le = $lastGoodEns;

}

$nEns = $le - $fe + 1;

die("$0: insufficient data\n") if ($nEns < 2);

$P{N_ensembles} = $nEns;

$firstBin = 0;

$lastBin = $lastGoodBin;

print( STDERR "Start      : $dta{ENSEMBLE}[$fe]->{DATE} $dta{ENSEMBLE}[$fe]->{TIME}\n");

print( STDERR "End        : $dta{ENSEMBLE}[$le]->{DATE} $dta{ENSEMBLE}[$le]->{TIME}\n");

printf(STDERR "Bins       : %d-%d\n",$firstBin+1,$lastBin+1);

printf(STDERR "3-Beam     : %d %d %d %d\n",$RDI_Coords::threeBeam_1,

										   $RDI_Coords::threeBeam_2,

										   $RDI_Coords::threeBeam_3,

										   $RDI_Coords::threeBeam_4)

	unless ($opt_b);										   

#----------------------------------------------------------------------

# Calculate Stddevs

#----------------------------------------------------------------------

for ($b=0; $b<=$lastGoodBin; $b++) {

	$mean_corr1[$b] = $sum_corr1[$b] / $nEns; $mean_corr2[$b] = $sum_corr2[$b] / $nEns;

	$mean_corr3[$b] = $sum_corr3[$b] / $nEns; $mean_corr4[$b] = $sum_corr4[$b] / $nEns;

	$mean_amp1[$b] = $sum_amp1[$b] / $nEns; $mean_amp2[$b] = $sum_amp2[$b] / $nEns;

	$mean_amp3[$b] = $sum_amp3[$b] / $nEns; $mean_amp4[$b] = $sum_amp4[$b] / $nEns;

	$mean_pcg1[$b] = $sum_pcg1[$b] / $n_pcg1[$b]; $mean_pcg2[$b] = $sum_pcg2[$b] / $n_pcg2[$b];

	$mean_pcg3[$b] = $sum_pcg3[$b] / $n_pcg3[$b]; $mean_pcg4[$b] = $sum_pcg4[$b] / $n_pcg4[$b];

	$mean_u[$b] = $sum_u[$b] / $good_vels[$b]; $mean_v[$b] = $sum_v[$b] / $good_vels[$b];

	$mean_w[$b] = $sum_w[$b] / $good_vels[$b];

}

for ($e=$fe; $e<=$le; $e++) {

	for ($b=0; $b<=$lastGoodBin; $b++) {

		$sumsq_corr1[$b] += ($mean_corr1[$b] - $dta{ENSEMBLE}[$e]->{CORRELATION}[$b][0])**2;

		$sumsq_corr2[$b] += ($mean_corr2[$b] - $dta{ENSEMBLE}[$e]->{CORRELATION}[$b][1])**2;

		$sumsq_corr3[$b] += ($mean_corr3[$b] - $dta{ENSEMBLE}[$e]->{CORRELATION}[$b][2])**2;

		$sumsq_corr4[$b] += ($mean_corr4[$b] - $dta{ENSEMBLE}[$e]->{CORRELATION}[$b][3])**2;

		$sumsq_amp1[$b] += ($mean_amp1[$b] - $dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b][0])**2;

		$sumsq_amp2[$b] += ($mean_amp2[$b] - $dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b][1])**2;

		$sumsq_amp3[$b] += ($mean_amp3[$b] - $dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b][2])**2;

		$sumsq_amp4[$b] += ($mean_amp4[$b] - $dta{ENSEMBLE}[$e]->{ECHO_AMPLITUDE}[$b][3])**2;

		$sumsq_pcg1[$b] += ($mean_pcg1[$b] - $dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][0])**2

			if defined($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][0]);

		$sumsq_pcg2[$b] += ($mean_pcg2[$b] - $dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][1])**2

			if defined($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][1]);

		$sumsq_pcg3[$b] += ($mean_pcg3[$b] - $dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][2])**2

			if defined($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][2]);

		$sumsq_pcg4[$b] += ($mean_pcg4[$b] - $dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][3])**2

			if defined($dta{ENSEMBLE}[$e]->{PERCENT_GOOD}[$b][3]);

		next unless ($dta{ENSEMBLE}[$e]->{GOOD_VEL}[$b]);

		$sumsq_u[$b] += ($mean_u[$b] - $dta{ENSEMBLE}[$e]->{VELOCITY}[$b][0])**2;

		$sumsq_v[$b] += ($mean_v[$b] - $dta{ENSEMBLE}[$e]->{VELOCITY}[$b][1])**2;

		$sumsq_w[$b] += ($mean_w[$b] - $dta{ENSEMBLE}[$e]->{VELOCITY}[$b][2])**2;

		next if ($dta{ENSEMBLE}[$e]->{THREE_BEAM}[$b]);

		$sumsq_e[$b] += ($mean_e[$b] - $dta{ENSEMBLE}[$e]->{VELOCITY}[$b][3])**2;

	}

}

for ($b=0; $b<=$lastGoodBin; $b++) {

	$var_corr1[$b] = $sumsq_corr1[$b] / ($nEns-1); $var_corr2[$b] = $sumsq_corr2[$b] / ($nEns-1);

	$var_corr3[$b] = $sumsq_corr3[$b] / ($nEns-1); $var_corr4[$b] = $sumsq_corr4[$b] / ($nEns-1);

	$var_amp1[$b] = $sumsq_amp1[$b] / ($nEns-1); $var_amp2[$b] = $sumsq_amp2[$b] / ($nEns-1);

	$var_amp3[$b] = $sumsq_amp3[$b] / ($nEns-1); $var_amp4[$b] = $sumsq_amp4[$b] / ($nEns-1);

	$var_pcg1[$b] = $sumsq_pcg1[$b] / ($n_pcg1[$b]-1) if ($n_pcg1[$b] > 1);

	$var_pcg2[$b] = $sumsq_pcg2[$b] / ($n_pcg2[$b]-1) if ($n_pcg2[$b] > 1);

	$var_pcg3[$b] = $sumsq_pcg3[$b] / ($n_pcg3[$b]-1) if ($n_pcg3[$b] > 1);

	$var_pcg4[$b] = $sumsq_pcg4[$b] / ($n_pcg4[$b]-1) if ($n_pcg4[$b] > 1);

	next unless ($good_vels[$b] > 1);

	$var_u[$b] = $sumsq_u[$b] / ($good_vels[$b]-1);

	$var_v[$b] = $sumsq_v[$b] / ($good_vels[$b]-1);

	$var_w[$b] = $sumsq_w[$b] / ($good_vels[$b]-1);

	next unless ($good_vels[$b] - $three_beam[$b] > 1);

	$var_e[$b] = $sumsq_e[$b] / ($good_vels[$b] - $three_beam[$b] - 1);

}

#----------------------------------------------------------------------

# Calculate Beam Statistics

#----------------------------------------------------------------------

#----------------------------------------------------------------------

# Produce Output

#----------------------------------------------------------------------

unless ($opt_Q) {

	my($ssCorr) = defined($opt_S)

				? ssCorr($dta{ENSEMBLE}[$fe],$SS_salin,$SS_temp,$SS_depth)

				: 1;

	print("#ANTS#PARAMS# ");

	foreach my $k (keys(%P)) {

		print("$k\{$P{$k}\} ");

	}

	printf("soundspeed_correction{%s}",defined($opt_S) ? $opt_S : 'NONE!');

	print("\n");

	print("#ANTS#FIELDS# " .

		  "{bin} {dz} " .

		  (defined($opt_D) ? "{depth} " : "") .

		  ($opt_b ? "{v1} {v2} {v3} {v4} " : "{u} {v} {w} {err_vel} ") .

		  ($opt_b ? "{sig_v1} {sig_v2} {sig_v3} {sig_v4} " : "{sig_u} {sig_v} {sig_w} {sig_err_vel} ") .

		  "{corr1} {corr2} {corr3} {corr4} " .

		  "{sig_corr1} {sig_corr2} {sig_corr3} {sig_corr4} " .

		  "{amp1} {amp2} {amp3} {amp4} " .

		  "{sig_amp1} {sig_amp2} {sig_amp3} {sig_amp4} " .

		  "{pcg1} {pcg2} {pcg3} {pcg4} " .

		  "{sig_pcg1} {sig_pcg2} {sig_pcg3} {sig_pcg4}" .

		  "\n"

	);

	for ($b=$firstBin; $b<=$lastBin; $b++) {

		printf("%d %.1f ",$b+1,$dz[$b]*$ssCorr);

		printf("%.1f ",$opt_D - $dz[$b]*$ssCorr)

			if defined($opt_D);

		printf("%s ",defined($mean_u[$b]) ? $mean_u[$b] : nan);

		printf("%s ",defined($mean_v[$b]) ? $mean_v[$b] : nan);

		printf("%s ",defined($mean_w[$b]) ? $mean_w[$b] : nan);

		printf("%s ",defined($mean_e[$b]) ? $mean_e[$b] : nan);

		printf("%s ",defined($var_u[$b]) ? sqrt($var_u[$b]) : nan);

		printf("%s ",defined($var_v[$b]) ? sqrt($var_v[$b]) : nan);

		printf("%s ",defined($var_w[$b]) ? sqrt($var_w[$b]) : nan);

		printf("%s ",defined($var_e[$b]) ? sqrt($var_e[$b]) : nan);

		printf("%g %g %g %g ",$mean_corr1[$b],$mean_corr2[$b],

						 	  $mean_corr3[$b],$mean_corr4[$b]);

		printf("%g %g %g %g ",sqrt($var_corr1[$b]),sqrt($var_corr2[$b]),

						 	  sqrt($var_corr3[$b]),sqrt($var_corr4[$b]));

		printf("%g %g %g %g ",$mean_amp1[$b],$mean_amp2[$b],

						 	  $mean_amp3[$b],$mean_amp4[$b]);

		printf("%g %g %g %g ",sqrt($var_amp1[$b]),sqrt($var_amp2[$b]),

						 	  sqrt($var_amp3[$b]),sqrt($var_amp4[$b]));

		if ($good_vels[$b] > 0) {

			printf("%g %g %g %g ",$mean_pcg1[$b],$mean_pcg2[$b],

								   $mean_pcg3[$b],$mean_pcg4[$b]);

			printf("%g %g %g %g\n",sqrt($var_pcg1[$b]),sqrt($var_pcg2[$b]),

								   sqrt($var_pcg3[$b]),sqrt($var_pcg4[$b]));

		} else {

			print("nan nan nan nan ");

			print("nan nan nan nan\n");

		}

	}

}

exit(0);