#======================================================================

#                    R D I _ B B _ R E A D . P L 

#                    doc: Sat Jan 18 14:54:43 2003

#                    (c) 2003 A.M. Thurnherr

#======================================================================

# Read RDI BroadBand Binary Data Files (*.[0-9][0-9][0-9])

# HISTORY:

#	Jan 18, 2003: - incepted aboard the Aurora Australis (KAOS)

#	Jan 19, 2003: - continued

#	Jan 20, 2003: - replaced INTENSITY by AMPLITUDE

#	Jan 21, 2003: - changed heading-correction field names

#	Jan 27, 2003: - cosmetics

#	Feb 14, 2003: - moved BT setup into header

#	Mar 15, 2003: - moved 10th xmit voltage into header as BATTERY field

#				  - removed again, because values are not meaningful

#	Feb 24, 2004: - continued aboard Nathaniel B. Palmer (Anslope II)

#				  - BUG: ensemble # was wrong on error messages

#	Feb 26, 2004: - removed ESW_ERROR and bitmasking of ERROR_STATUS_WORD

#	Feb 27, 2004: - removed some unused (commented-out) baggage

#	Mar 11, 2004: - BUG: renamed ACD -> ADC

#	Mar 18, 2004: - cosmetics

#	Mar 30, 2004: - rewrote to speed up reading; new version takes

#					~40% less time

#	Sep 14, 2005: - made BT data optional (NUMBER_OF_DATA_TYPES)

#				  - added DATA_FORMAT

#	Sep 15, 2005: - debugged

#				  - implement checksum to robustly find EOF

#				  - renamed to RDI_BB_Read.pl

#				  - BUG: had used POSIX::mktime with wrong month def!

#	Oct 30, 2005: - added WH300 FW16.27 file format

#				  - added DATA_FORMAT_VARIANT

#				  - changed semantics so that first valid ensemble is

#				    in E[0] (instead of E[$ensNo-1])

#	Nov  8, 2005: - replaced UNIXTIME by UNIX_TIME

#				  - added SECNO

#	Aug 31: 2006: - added DAYNO

#	Aug  1, 2007: - BUG: typo in monthLength()

#	Sep 18, 2007: - modified readHeader() readDta() WBRhdr() WBRens() to

#					conserve memory (no large arrays as retvals)

#	Jun  4, 2008: - BUG: BB150 code was not considered on Sep 18, 2007

#	Aug 15, 2010: - downgraded "unexpected number of data types" from error to warning

#				  - BUG: WBRcfn had not been set correctly

#				  - modified to allow processing files without time info

#	May 12, 2011: - added code to report built-in-test errors

# FIRMWARE VERSIONS:

#	It appears that different firmware versions generate different file

#	structures. Currently (Sep 2005) these routines have been tested

#

#	Firmw.	DATA_FORMAT(_VARIANT)	Owner 	Cruise	FIXED_LEADER_LENGTH

#------------------------------------------------------------

#	05.52	BB150 (1)				UH 		CLIVAR/P16S 42

#	16.12	WH300 (1)				FSU 	A0304		53

#	16.21	WH300 (1)				LDEO 	NBP0402		53

#	16.27	WH300 (2)				Nash 	?			59

# NOTES:

#	- RDI stores data in VAX/Intel byte order (little endian)

#	- the output data structure does not exactly mirror the file data

#	  structure; the header is not stored at all and the fixed leader

#	  data are not duplicated in every ensemble

#	- in the RDI files some fields that logically belong into the header

#	  or the fixed leader (e.g. BT_MIN_CORRELATION) appear in the 

#	  ensemble data --- these are not read on input

#	- the field names are generally unabbreviated except for

#	  BT (= Bottom Track), RL (= Reference Layer), MIN and MAX

#	- all arrays are 0-referenced, but the ensemble number is not!

#	- a list of filenames can be be passed to readData() so that

#	  files split onto several memory cards (typically .000 .001 &c)

#	  can be read --- not sure if this works, actually

#	- the RDI manuals are not entirely clear everywhere; I have made

#	  guesses in some cases, but they should not affect the main

#	  fields of interest

#	- some fields in the fixed leader are not really fixed in a LADCP

#	  setting (e.g. xducer orientation); I'v made an educated guess

#	  as to which fields to move to the ENS array

#	- all units except pressure are SI, i.e. in m and m/s

#	- I don't understand the ERROR_STATUS_WORD; here's what 3 different

#	  instruments returned:

#	  	0x88000100	FSU instrument during A0304 (Firmware 16.12)

#		0x88008180	LDEO uplooker (slave) during NBP0402 (Firmware 16.21)

#		0x00008180	LDEO downlooker (master) during NBP0402 (Firmware 16.21)

#	  According to the manual (January 2001 version) this would, for example,

#	  indicate power failures on both FSU and LDEO slave instruments...

# &readData() returns perl obj (ref to anonymous hash) with the following

# structure:

#

#	NUMBER_OF_DATA_TYPES			scalar		6 (no BT) or 7

#	ENSEMBLE_BYTES					scalar		?, number of bytes w/o checksum

#	HEADER_BYTES					scalar		?

#	VARIABLE_LEADER_BYTES			scalar		?

#	VELOCITY_DATA_BYTES				scalar		?

#	CORRELATION_DATA_BYTES			scalar		?

#	ECHO_INTENSITY_DATA_BYTES		scalar		?

#	PERCENT_GOOD_DATA_BYTES			scalar		?

#	BT_PRESENT						bool		NUMBER_OF_DATA_TYPES == 7

#	BT_DATA_BYTES					scalar		undefined, ? if BT_PRESENT

#	CPU_FW_VER						scalar		0--255

#	CPU_FW_REV						scalar		0--255

#	BEAM_FREQUENCY					scalar		75, 150, 300, 600, 1200, 2400 [kHz]

#	CONVEX_BEAM_PATTERN				bool		undefined, 1

#	CONCAVE_BEAM_PATTERN			bool		undefined, 1

#	SENSOR_CONFIG					scalar		1--3

#	XDUCER_HEAD_ATTACHED			bool		undefined, 1

#	BEAM_ANGLE						scalar		15,20,30,undefined=other [deg]

#	N_BEAMS							scalar		4--5

#	N_DEMODS						scalar		2--3(???),undefined=n/a

#	N_BINS							scalar		1--128

#	PINGS_PER_ENSEMBLE				scalar		0--16384

#	BIN_LENGTH						scalar		0.01--64 [m]

#	BLANKING_DISTANCE				scalar		0-99.99 [m]

#	MIN_CORRELATION					scalar		0--255

#	N_CODE_REPETITIONS				scalar		0--255

#	MIN_PERCENT_GOOD				scalar		1--100 [%]

#	MAX_ERROR_VELOCITY				scalar		0--5 [m/s]

#	TIME_BETWEEN_PINGS				scalar		0--? [s]

#	BEAM_COORDINATES				bool		undefined,1

#	INSTRUMENT_COORDINATES			bool		undefined,1

#	SHIP_COORDINATES				bool		undefined,1

#	EARTH_COORDINATES				bool		undefined,1

#	PITCH_AND_ROLL_USED				bool		undefined,1

#	USE_3_BEAM_ON_LOW_CORR			bool		undefined,1

#	BIN_MAPPING_ALLOWED				bool		undefined,1

#	HEADING_ALIGNMENT 				scalar		-179.99..180 [deg]

#	HEADING_BIAS			 		scalar		-179.99..180 [deg]

#	CALCULATE_SPEED_OF_SOUND		bool		undefined,1

#	USE_PRESSURE_SENSOR				bool		undefined,1

#	USE_COMPASS						bool		undefined,1

#	USE_PITCH_SENSOR				bool		undefined,1

#	USE_ROLL_SENSOR					bool		undefined,1

#	USE_CONDUCTIVITY_SENSOR			bool		undefined,1

#	USE_TEMPERATURE_SENSOR			bool		undefined,1

#	SPEED_OF_SOUND_CALCULATED		bool		undefined,1

#	PRESSURE_SENSOR_AVAILABLE		bool		undefined,1

#	COMPASS_AVAILABLE				bool		undefined,1

#	PITCH_SENSOR_AVAILABLE			bool		undefined,1

#	ROLL_SENSOR_AVAILABLE			bool		undefined,1

#	CONDUCTIVITY_SENSOR_AVAILABLE	bool		undefined,1

#	TEMPERATURE_SENSOR_AVAILABLE	bool		undefined,1

#	DISTANCE_TO_BIN1_CENTER			scalar		0--655.35 [m]

#	TRANSMITTED_PULSE_LENGTH		scalar		0--655.35 [m]

#	RL_FIRST_BIN					scalar		1--128

#	RL_LAST_BIN						scalar		1--128

#	FALSE_TARGET_THRESHOLD			scalar		0--254, undefined=disabled

#	LOW_LATENCY_SETTING				scalar		0--5(???)

#	TRANSMIT_LAG_DISTANCE			scalar		0--655.35 [m]

#	CPU_SERIAL_NUMBER				scalar		undefined, 0--65535 if WH300

#	NARROW_BANDWIDTH				bool		undefined,1 (only set if WH300)

#	WIDE_BANDWIDTH					bool		undefined,1 (only set if WH300)

#	TRANSMIT_POWER					scalar		undefined, 0--255(high) if WH300

#	TRANSMIT_POWER_HIGH				bool		undefined,1 (only set if WH300)

#	BT_PINGS_PER_ENSEMBLE			scalar		0--999

#	BT_DELAY_BEFORE_REACQUIRE		scalar		0--999

#	BT_MIN_CORRELATION				scalar		0--255

#	BT_MIN_EVAL_AMPLITUDE			scalar		0--255

#	BT_MIN_PERCENT_GOOD				scalar		0--100 [%]

#	BT_MODE							scalar		4,5,6(?)

#	BT_MAX_ERROR_VELOCITY			scalar		0--5 [m/s], undef=not screened

#	BT_RL_MIN_SIZE					scalar		0--99.9 [m]

#	BT_RL_NEAR						scalar		0--999.9 [m]

#	BT_RL_FAR						scalar		0--999.9 [m]

#	BT_MAX_TRACKING_DEPTH			scalar		8--999.9 [m]

#	ENSEMBLE[ensemble_no-1]			array		ensemble info

#		XDUCER_FACING_UP			bool		undefined, 1

#		XDUCER_FACING_DOWN			bool		undefined, 1

#		N_BEAMS_USED				scalar		3,4,5(?)

#		NUMBER						scalar		1--16777215

#		BUILT_IN_TEST_ERROR			scalar		?,undefined=none

#		SPEED_OF_SOUND				scalar		1400--1600 [m/s]

#		XDUCER_DEPTH				scalar		0.1--999.9 [m]

#		HEADING						scalar		0--359.99 [deg]

#		PITCH						scalar		-20.00-20.00 [deg]

#		ROLL						scalar		-20.00-20.00 [deg]

#		SALINITY					scalar		0-40 [psu]

#		TEMPERATURE					scalar		-5.00--40.00 [deg]

#		MIN_PRE_PING_WAIT_TIME		scalar		? [s]

#		HEADING_STDDEV				scalar		0-180 [deg]

#		PITCH_STDDEV				scalar		0.0-20.0 [deg]

#		ROLL_STDDEV					scalar		0.0-20.0 [deg]

#		ADC_XMIT_CURRENT			scalar		0--255

#		ADC_XMIT_VOLTAGE			scalar		0--255

#		ADC_AMBIENT_TEMPERATURE		scalar		0--255

#		ADC_PRESSURE_PLUS			scalar		0--255

#		ADC_PRESSURE_MINUS			scalar		0--255

#		ADC_ATTITUDE_TEMPERATURE	scalar		0--255

#		ADC_ATTITUDE				scalar		0--255

#		ADC_CONTAMINATION			scalar		0--255

#		ERROR_STATUS_WORD			scalar		undefined, ? (only set if WH300)

#		PRESSURE					scalar		undefined, ?-? [dbar] (only set if WH300)

#		PRESSURE_STDDEV				scalar		undefined, ?-? [dbar] (only set if WH300)

#		DATE						string		MM/DD/YYYY

#		YEAR						scalar		?

#		MONTH						scalar		1--12

#		DAY							scalar		1--31

#		TIME						string		HH:MM:SS.hh

#		HOUR						scalar		0--23

#		MINUTE						scalar		0--59

#		SECONDS						scalar		0--59.99

#		UNIX_TIME					scalar		0--?

#		SECNO						scalar		0--? (number of seconds since daystart)

#		DAYNO						double		fractional day number since start of current year (1.0 is midnight Jan 1st)

#		VELOCITY[bin][beam]			scalars		-32.767--32.768 [m/s], undef=bad

#		CORRELATION[bin][beam]		scalars		1--255, undefined=bad

#		ECHO_AMPLITUDE[bin][beam]	scalars		0--255

#		PERCENT_GOOD[bin][beam]		scalars		0--255

#		BT_RANGE[beam]				scalars		tons [m]

#		BT_VELOCITY[beam]			scalars		see VELOCITY

#		BT_CORRELATION[beam]		scalars		see CORRELATION

#		BT_EVAL_AMPLITUDE[beam]		scalars		0--255

#		BT_PERCENT_GOOD[beam]		scalars		see PERCENT_GOOD

#		BT_RL_VELOCITY[beam]		scalars		see VELOCITY

#		BT_RL_CORRELATION[beam]		scalars		see CORRELATION

#		BT_RL_ECHO_AMPLITUDE[beam]	scalars		see ECHO_AMPLITUDE

#		BT_RL_PERCENT_GOOD[beam]	scalars		see PERCENT_GOOD

#		BT_SIGNAL_STRENGTH[beam]	scalars		0--255

#		HIGH_GAIN					bool		1, undefined

#		LOW_GAIN					bool		1, undefined

use strict;

use Time::Local;						# timegm()

#----------------------------------------------------------------------

# Time Conversion Subroutines

#----------------------------------------------------------------------

sub monthLength($$)										# of days in month

{

    my($Y,$M) = @_;

    return 31 if ($M==1 || $M==3 || $M==5 || $M==7 ||

                  $M==8 || $M==10 || $M==12);

    return 30 if ($M==4 || $M==6 || $M==9 || $M==11);

    return 28 if ($Y%4 != 0);

    return 29 if ($Y%100 != 0);

    return 28 if ($Y%400 > 0);

    return 29;

}

{ my($epoch,$lM,$lD,$lY,$ldn);							# static scope

  sub dayNo($$$$$$)

  {

	  my($Y,$M,$D,$h,$m,$s) = @_;

	  my($dn);

	  if ($Y==$lY && $M==$lM && $D==$lD) {				# same day as last samp

		  $dn = $ldn;

	  } else {											# new day

		  $epoch = $Y unless defined($epoch);			# 1st call

		  $lY = $Y; $lM = $M; $lD = $D;					# store

		  for ($dn=0,my($cY)=$epoch; $cY<$Y; $cY++) {	# multiple years

			  $dn += 337 + &monthLength($Y,$M);

		  }

		  $dn += $D;									# day in month

		  while (--$M > 0) {							# preceding months

			  $dn += &monthLength($Y,$M);

		  }

		  $ldn = $dn;									# store

	  }

	  return $dn + $h/24 + $m/24/60 + $s/24/3600;

  }

} # static scope

#----------------------------------------------------------------------

# Read Data

#----------------------------------------------------------------------

my($WBRcfn);							# current file name

my($BIT_errors) = 0;					# built-in-test errors

my($FmtErr) = "%s: illegal %s Id 0x%04x at ensemble %d";

sub WBRhdr($)

{

	my($dta) = @_;

	my($B1,$B2,$B3,$B4,$B5,$B6,$B7,$W1,$W2,$W3,$W4,$W5);

	#--------------------

	# HEADER

	#--------------------

	($hid,$did,$dta->{ENSEMBLE_BYTES},$dummy,$dta->{NUMBER_OF_DATA_TYPES})

		= unpack('CCvCC',$buf);

	$hid == 0x7f || die(sprintf($FmtErr,$WBRcfn,"Header",$hid,0));

	$did == 0x7f || die(sprintf($FmtErr,$WBRcfn,"Data Source",$did,0));

	printf(STDERR "\n$WBRcfn: WARNING: unexpected number of data types (%d)\n",

		$dta->{NUMBER_OF_DATA_TYPES})

			unless ($dta->{NUMBER_OF_DATA_TYPES} == 6 ||

					$dta->{NUMBER_OF_DATA_TYPES} == 7);

	$dta->{BT_PRESENT} = ($dta->{NUMBER_OF_DATA_TYPES} == 7);

	read(WBRF,$buf,2*$dta->{NUMBER_OF_DATA_TYPES})

		== 2*$dta->{NUMBER_OF_DATA_TYPES}

	@WBRofs = unpack("v$dta->{NUMBER_OF_DATA_TYPES}",$buf);

	$dta->{HEADER_BYTES} 					= $WBRofs[0];

	$dta->{FIXED_LEADER_BYTES} 				= $WBRofs[1] - $WBRofs[0];

	$dta->{VARIABLE_LEADER_BYTES}			= $WBRofs[2] - $WBRofs[1];

	$dta->{VELOCITY_DATA_BYTES}				= $WBRofs[3] - $WBRofs[2];

	$dta->{CORRELATION_DATA_BYTES}			= $WBRofs[4] - $WBRofs[3];

	$dta->{ECHO_INTENSITY_DATA_BYTES}		= $WBRofs[5] - $WBRofs[4];

	if ($dta->{BT_PRESENT}) {

		$dta->{PERCENT_GOOD_DATA_BYTES}		= $WBRofs[6] - $WBRofs[5];

		$dta->{BT_DATA_BYTES}				= $dta->{ENSEMBLE_BYTES} - 4 - $WBRofs[6];

	} else {

		$dta->{PERCENT_GOOD_DATA_BYTES}		= $dta->{ENSEMBLE_BYTES} - 4 - $WBRofs[5];

	}

#	for ($i=0; $i<$dta->{NUMBER_OF_DATA_TYPES}; $i++) {

#		printf(STDERR "\nWBRofs[$i] = %d",$WBRofs[$i]);

#	}

	#----------------------------------

	# Check Data Format of 1st Ensemble

	#----------------------------------

	seek(WBRF,$WBRofs[1],0) || die("$WBRcfn: $!");

	$id = unpack('v',$buf);

	$id == 0x0080 || die(sprintf($FmtErr,$WBRcfn,"Variable Leader",$id,1));

	seek(WBRF,$WBRofs[2],0) || die("$WBRcfn: $!");

	$id = unpack('v',$buf);

	$id == 0x0100 || die(sprintf($FmtErr,$WBRcfn,"Velocity Data",$id,1));

	seek(WBRF,$WBRofs[3],0) || die("$WBRcfn: $!");

	$id = unpack('v',$buf);

	$id == 0x0200 || die(sprintf($FmtErr,$WBRcfn,"Correlation Data",$id,1));

	seek(WBRF,$WBRofs[4],0) || die("$WBRcfn: $!");

	$id = unpack('v',$buf);

	$id == 0x0300 || die(sprintf($FmtErr,$WBRcfn,"Echo Intensity",$id,1));

	seek(WBRF,$WBRofs[5],0) || die("$WBRcfn: $!");

	$id = unpack('v',$buf);

	$id == 0x0400 || die(sprintf($FmtErr,$WBRcfn,"Percent-Good Data",$id,1));

	if ($dta->{BT_PRESENT}) {

		seek(WBRF,$WBRofs[6],0) || die("$WBRcfn: $!");

		$id = unpack('v',$buf);

		$id == 0x0600 || die(sprintf($FmtErr,$WBRcfn,"Bottom Track",$id,1));

    }

	#--------------------

	# FIXED LEADER

	#--------------------

	seek(WBRF,$WBRofs[0],0) || die("$WBRcfn: $!");

	($id,$dta->{CPU_FW_VER},$dta->{CPU_FW_REV},$B1,$B2,$dummy,$dummy,$dummy,

	 $dta->{N_BINS},$dta->{PINGS_PER_ENSEMBLE},$dta->{BIN_LENGTH},

	 $dta->{BLANKING_DISTANCE},$dummy,$dta->{MIN_CORRELATION},

	 $dta->{N_CODE_REPETITIONS},$dta->{MIN_PERCENT_GOOD},

	 $dta->{MAX_ERROR_VELOCITY},$dta->{TIME_BETWEEN_PINGS},$B3,$B4,$B5,

	 $dta->{HEADING_ALIGNMENT},$dta->{HEADING_BIAS},$B6,$B7,

	 $dta->{DISTANCE_TO_BIN1_CENTER},$dta->{TRANSMITTED_PULSE_LENGTH},

	 $dta->{REF_LAYER_FIRST_BIN},$dta->{REF_LAYER_LAST_BIN},

	 $dta->{FALSE_TARGET_THRESHOLD},$dta->{LOW_LATENCY_SETTING},

	 $dta->{TRANSMIT_LAG_DISTANCE}) =

		unpack('vCCCCC3CvvvCCCCvCCCCvvCCvvCCCCv',$buf);

	$id == 0x0000 || die(sprintf($FmtErr,$WBRcfn,"Fixed Leader",$id,0));

    $dta->{BEAM_FREQUENCY} = 2**($B1 & 0x07) * 75;

    $dta->{CONVEX_BEAM_PATTERN} = 1 if ($B1 & 0x08);

    $dta->{CONCAVE_BEAM_PATTERN} = 1 if (!($B1 & 0x08));

    $dta->{SENSOR_CONFIG} = ($B1 & 0x30) >> 4;

    $dta->{XDUCER_HEAD_ATTACHED} = 1 if ($B1 & 0x40);

	if	  (($B2 & 0x03) == 0x00) { $dta->{BEAM_ANGLE} = 15; }

	elsif (($B2 & 0x03) == 0x01) { $dta->{BEAM_ANGLE} = 20; }

	elsif (($B2 & 0x03) == 0x02) { $dta->{BEAM_ANGLE} = 30; }

	if	  (($B2 & 0xF0) == 0x40) { $dta->{N_BEAMS} = 4; }

	elsif (($B2 & 0xF0) == 0x50) { $dta->{N_BEAMS} = 5; $dta->{N_DEMODS} = 3; }

    elsif (($B2 & 0xF0) == 0xF0) { $dta->{N_BEAMS} = 5; $dta->{N_DEMODS} = 2; }

    $dta->{BIN_LENGTH} /= 100;

    $dta->{BLANKING_DISTANCE} /= 100;

    $dta->{MAX_ERROR_VELOCITY} /= 1000;

    $dta->{TIME_BETWEEN_PINGS} *= 60;

	$dta->{TIME_BETWEEN_PINGS} += $B3 + $B4/100;

	$dta->{BEAM_COORDINATES}		  = 1 if (($B5 & 0x18) == 0x00);

	$dta->{INSTRUMENT_COORDINATES}	  = 1 if (($B5 & 0x18) == 0x08);

	$dta->{SHIP_COORDINATES}		  = 1 if (($B5 & 0x18) == 0x10);

	$dta->{EARTH_COORDINATES}		  = 1 if (($B5 & 0x18) == 0x18);

	$dta->{PITCH_AND_ROLL_USED} 	  = 1 if ($B5 & 0x04);

	$dta->{USE_3_BEAM_ON_LOW_CORR}	  = 1 if ($B5 & 0x02);

    $dta->{BIN_MAPPING_ALLOWED}       = 1 if ($B5 & 0x01);

	$dta->{HEADING_ALIGNMENT} =

		($dta->{EARTH_COORDINATES} || $dta->{SHIP_COORDINATES}) ?

			$dta->{HEADING_ALIGNMENT} / 100 : undef;

	$dta->{HEADING_BIAS} =

		($dta->{EARTH_COORDINATES} || $dta->{SHIP_COORDINATES}) ?

			$dta->{HEADING_BIAS} / 100 : undef;

	$dta->{CALCULATE_SPEED_OF_SOUND}  = 1 if ($B6 & 0x40); 

	$dta->{USE_PRESSURE_SENSOR} 	  = 1 if ($B6 & 0x20); 

	$dta->{USE_COMPASS} 			  = 1 if ($B6 & 0x10); 

	$dta->{USE_PITCH_SENSOR}		  = 1 if ($B6 & 0x08); 

	$dta->{USE_ROLL_SENSOR} 		  = 1 if ($B6 & 0x04); 

	$dta->{USE_CONDUCTIVITY_SENSOR}   = 1 if ($B6 & 0x02); 

    $dta->{USE_TEMPERATURE_SENSOR}    = 1 if ($B6 & 0x01); 

	$dta->{SPEED_OF_SOUND_CALCULATED}	  = 1 if ($B7 & 0x40); 

	$dta->{PRESSURE_SENSOR_AVAILABLE}	  = 1 if ($B7 & 0x20); 

	$dta->{COMPASS_AVAILABLE}			  = 1 if ($B7 & 0x10); 

	$dta->{PITCH_SENSOR_AVAILABLE}		  = 1 if ($B7 & 0x08); 

	$dta->{ROLL_SENSOR_AVAILABLE}		  = 1 if ($B7 & 0x04); 

	$dta->{CONDUCTIVITY_SENSOR_AVAILABLE} = 1 if ($B7 & 0x02); 

    $dta->{TEMPERATURE_SENSOR_AVAILABLE}  = 1 if ($B7 & 0x01); 

    $dta->{DISTANCE_TO_BIN1_CENTER}  /= 100;

    $dta->{TRANSMITTED_PULSE_LENGTH} /= 100;

    $dta->{FALSE_TARGET_THRESHOLD} = undef

		if ($dta->{FALSE_TARGET_THRESHOLD} == 255);

    $dta->{TRANSMIT_LAG_DISTANCE} /= 100;

		($W1,$W2,$W3,$W4,$W5,$dta->{TRANSMIT_POWER}) = 

			unpack('vvvvvC',$buf);

		$dta->{CPU_SERIAL_NUMBER} = sprintf("%04X%04X%04X%04X",$W1,$W2,$W3,$W4);

		$dta->{NARROW_BANDWIDTH} = ($W5 == 1);

		$dta->{WIDE_BANDWIDTH}	 = ($W5 == 0);

	    $dta->{TRANSMIT_POWER_HIGH} = ($dta->{TRANSMIT_POWER} == 255);

	#-----------------------

	# 1st ENSEMBLE, BT Setup

	#-----------------------

	if ($dta->{BT_PRESENT}) {

		seek(WBRF,$WBRofs[6],0) || die("$WBRcfn: $!");

		($id,$dta->{BT_PINGS_PER_ENSEMBLE},$dta->{BT_DELAY_BEFORE_REACQUIRE},

		 $dta->{BT_MIN_CORRELATION},$dta->{BT_MIN_EVAL_AMPLITUDE},

		 $dta->{BT_MIN_PERCENT_GOOD},$dta->{BT_MODE},

		 $dta->{BT_MAX_ERROR_VELOCITY}) = unpack('vvvCCCCv',$buf);

		$id == 0x0600 ||

			die(sprintf($FmtErr,$WBRcfn,"Bottom Track",$id,0,tell(WBRF)));

		$dta->{BT_MAX_ERROR_VELOCITY} =

			$dta->{BT_MAX_ERROR_VELOCITY} ? $dta->{BT_MAX_ERROR_VELOCITY} / 1000

										  : undef;

		seek(WBRF,28,1) || die("$WBRcfn: $!");

		($dta->{BT_RL_MIN_SIZE},$dta->{BT_RL_NEAR},$dta->{BT_RL_FAR})

			= unpack('vvv',$buf);

		$dta->{BT_RL_MIN_SIZE} /= 10;

		$dta->{BT_RL_NEAR} /= 10;

		$dta->{BT_RL_FAR} /= 10;

		seek(WBRF,20,1) || die("$WBRcfn: $!");		# skip data

	    $dta->{BT_MAX_TRACKING_DEPTH} = unpack('v',$buf) / 10;

    }

    return $dta;

}

{