Topic:
Markers will not post although they look fine in the marker data manager.

Description:
SYMPTOM: Occasionally, markers cannot be posted on seismic lines even though
they look fine in the marker data manager. This happens when posting well sets
with a combined total 255 or more wells.

Solution:
WORKAROUND: Create well sets with less than 255 wells, and post them one at a
time.  For example, create well sets 'a' and 'b', each containing 200 wells.
Go into the borehole posting menu, and select 'a' for posting (along with a
borehole appearance), and post them.  Then, go back into the borehole posting
menu, and leaving set 'a' still posted, select 'b' for posting and post those
wells.  This will allow you to post all 400 wells with their markers.
Note:  If you enter the borehole posting menu a single time, and select 'a' and
'b' for posting, the markers will not post on the seisimc, because you have 
exceeded the limit of 255 wells.

RESOLUTION: Corrected for GeoFrame 3.1.4




Last Modified on: 25-NOV-98