Topic:
Curves won't post on one well

Description:
The well appears fine on the Basemap and curves are visible 
in LPView, etc., but the curves won't post in the SeisDV 
window.  The borehole posts in the correct position, has a 
deviation survey and has an associated checkshot but none of 
the log curves will post on the seismic even though they 
exist and are included in the well appearance. 

Solution:
1) In DataManager > Wells > Time/Depth, verify that the 
checkshot associated to the well has the correct units (i.e. 
if the depth values are in feet, the units toggle should be 
set to feet).  

2)
a. Create a new depth/time checkshot in Wells > Time/Depth 
   with just two rows as follows (using the units appropriate 
   for your project):
 
	0m,0msec 
	TDm,TDmsecs(i.e., 3000m,3000msecs)
   
Associate it with the well.  Then check to see if the log 
posts on the seismic data.

b. Add a marker to the well at 1000m (DataManager > Wells 
   > Markers > Interpret Markers) and post the marker on the 
   seismic.  The marker should plot at 1000ms. If it does then 
   the problem is likely due to the values of the checkshot 
   originally associated to the well.  

3. If the checkshot values are not a problem, then verify the 
   values and units of the well path.



Last Modified on: 11-AUG-98