Frequently Asked Questions (FAQ) reported by GeoQuest (as of 4/24/2001)


001 What is the maximum value I can have for the starting line?
002 Can I run AutoPix on a specified area within a survey?
003 Where is the AutoPix option?
004 Can I use AutoPix for a 2D project?
005 How to set the color bar to best display coherency cube data?
006 Can successfully segy dump on an SGI, but data load fails with errors.
007 How does AutoPix handle faults?
008 What is the "Save attributes" option under Define > Interpretation used for?
009 The interpretation on the Basemap is not updating even though AutoPix is running. What's wrong?
010 How does the correlation picking algorithm work in AutoPix?
011 How does the event picking algorithm work in Autopix?
012 Can the starting line number be a cross line?
013 How do I keep my original picks separate from the autopicked version?
014 Can MapView be used while seismic is being loaded to the same project?
015 2D shotpoint numbering inconsistent after conversion from IES.
016 Amplitude attributes are not converted from IES to IESX.
017 Markers not converting from time to depth.
018 Why are my marker values plotted twice in 2 different sizes?
019 Why can't I see all markers that were loaded?
020 How is interpretation stored in IES vs IESX ?
021 What is the limit of the layer description in Cartography?
022 Some markers not converting to time, even though they had been previously converted.
023 Why are well paths not showing on seismic?
024 Why are my time slices distorted?
025 Can you share multiple survey volumes at one time?
026 Can you load Lat/Long with user-defined ACSII cartography data?
027 Can polygon paths be exported to another IESX project?
028 How do you reshare?
029 Why can I see a 2D line under "2D surveys", but not in Seis2DV ?
030 Why are some 2D lines not sharing?
031 Why do traces on my scaled seismic plot display as dead traces?
032 Patched project still retains shared links.
033 Why does my seismic traverse/composite path have dead traces on some sections?
034 I cannot see seismic data in Seis3DV/2DV, what's wrong?
035 Is the xy in the deviation survey Grid North or True North?
036 What is SDT in cartographic data loading?
037 Why is my color spectrum not posting when it is turned on for posting?
038 No data after 3D project conversion.
039 Can a user post his cartography on a surface slice?
040 Some 2D lines fail to convert.
041 Mechanism to transfer wells between IESX projects
042 Where do CGM plot files go ?
043 What are the null values for MapView grids?
044 What does "Force Thru Data Points" in Grid Operations do?
045 The interpretation appears as dots instead of a line after breaking.
046 Why are Total Depth (TD) values coming across CPS-3 Link as 0.000?
047 Why is gridded surface interpolating beyond fault boundaries in Basemap Plus?
048 Why doesn't the Basemap x/y values match those of MapView?
049 Why are my fault traces missing?
050 What does "MODE" mean in Posting Controls?
051 Can cartography be defined in MapView and posted on Basemap?
052 Why is my basemap so much bigger than my survey/project area?
053 Load Seismic: How is velocity data scaled?
054 Where is the CPS-3 Link application located?
055 Why are some fault traces not posting on MapView?
056 Can I post a selection of wells in MapView?
057 Why can't I get a color spectrum when viewing in perspective?
058 Can you control the posting location of well symbols?
059 Can you post traverse paths in MapView?
060 Applied a bulk shift - data doesn't reflect change.
061 Why is IESX to CPS-3 Link hanging up?
062 How does the convergent algorithm work in Basemap Plus?
063 Why do the surface slices appear all white (or all the same color)?
064 How does the residual algorithm work in Basemap Plus?
065 When might I want to use LPView?
066 Mistie Analysis correction algorithm (L1 and L2) explanation
067 Does IESX maintain the original seismic class when running Mistie Analysis?
068 Not all horizons available to grid.
069 Surface Slice does not run to completion, get size error, why?
070 Why can't I view data in SurfaceSlice?
071 What happens to shared volumes once a project has been copied/renamed?
072 Why doesn't the amplitude in the surface slice change polarity when the seismic display specs are changed to reverse polarity?
073 How does the least squares algorithm work in Basemap Plus?
074 How does the trend algorithm work in Basemap Plus?
075 How does trend/residual algorithm differ from either trend or residual algorithm?
076 Tubular extraction synthetic does not match trace/well data.
077 What is LPView?
078 Time depth curve from sonic does not match that from checkshot data.
079 How does tubular extraction work?
080 Can Mistie Analysis be run on data with DIFFERENT SAMPLE RATES?
081 Can TIF formatted log files be loaded into IES Data Management?
082 Reloaded a path in IES Data Management, but do not see the changes in IESX.
083 What is the null log value for an IESX project?
084 I want to compute delta time from resistivity. Where can I do this?
085 How to create a listing of wells, logs, deviations, etc.
086 Is the scale in Scaled Plots in MapView the same as in Basemap?
087 Why are my contours displaying on the screen but not on my plot?
088 Can tobin format well data be loaded into IES Data Management?
089 Can you load wells into the project with a different projection?
090 Is there any form of raster or postscript output from IESX?
091 Why does my time slice display in only one color when the seismic displays fine?
092 DSL (Disk Storage Location) assignment for non-owner user of project.
093 Why are the traces on the scaled plot clipped?
094 I want to compute density from delta time. Where can I do this?
095 How to display/edit logs from different wells on the same screen.
096 What are the minimum requirements to load a well into IESX?
097 Will Project Converter overwrite data in the IESX project?
098 Can you plot a series of time slices at once?
099 How to quickly delete undesired log values.
100 What computed curves can I get from LPView?
101 How to reduce log values by a given fraction.
102 What is the maximum number of wells in IES?
103 What is the maximum number of formation tops per project?
104 How does "scaling" log data differ from "rescaling"?
105 Is it possible to export Basemap layers with map edit features?
106 What is the maximum number of log curves allowed?
107 How to filter a curve.
108 Can I specify a plotter for Snapshot?
109 Can IESX output a DXF (Autocad) plot file?
110 Can you have multiple seismic lines per plot?
111 Plotting same map in MapView more than once and it comes up with different colors each time
112 Save session compatibility in GeoFrame3.1 from GeoFrame3.0.
113 No plots are coming out after the machine where the ZEH software resides was down
114 What does Option #5: Clean the survey descriptions do?
115 Seismic data plots through Zeh, but doesn't come out on paper.
116 What plotting files do I need to modify for a new setup?
117 What does Option #10: Compress all BAT volumes do?
118 Can you rotate plots in IESX?
119 What are the differences between ASAP and AutoPix?
120 What is the maximum number of characters for a well name?
121 What does Option #11: Compress CAT files do?
122 What does Option #22: Rebuild Interpretation do?
123 What does Option #25: Delete duplicate fault traces do?
124 What does Option #33: Estimate seismic volume size do?
125 Markers will not post in Seis2DV/3DV or Basemap window.
126 Practical Uses of SeisAn, Attribute and Mappable Seismic Statistics.
127 Suggested IESX project file permissions.
128 What are the minimum requirements for posting wells and their paths in Basemap?
129 What are the minimum requirements to post wells and their paths in Seis3DV/2DV?
130 Can well logs be output in LAS format?
131 Is there a CGM previewer in IESX?
132 Is it possible to get a plot to come out in the center of the sheet?
133 What does Option #21: Delete all IESX interpretation do?
134 What does Option #23: Delete duplicate contacts do?
135 What does Option #24: Delete duplicate fault cuts do?
136 What does Option #31: Delete all empty seismic classes do?
137 What does Option #32: Update seismic volume statistics do?
138 What does Option #34: Seismic file name decoding do?
139 What does Option #35: Seismic volumes report do?
140 What does Option #37: Shotpoint table scanner do?
141 What does Option #38: Extrapolation of xy coordinates do?
142 What does Option #39: Compression of shotpoint tables do?
143 What does Option #41: Check inventory files do?
144 What does Option #42: Delete missing files do?
145 What does Option #43: Validate 2D survey lists do?
146 What does Option #44: Delete db_phys_path file do?
147 What does Option #45: DSL Report do?
148 What does Option #52: Adding wavelet exploration object do?
149 What does Option #51: Adjust exploration object extent do?
150 What does Option #61: Data area release version do?
151 What does Option #71: Project disk report do?
152 What does Option #72: 2D General Data Manager do?
153 What does Option #74: Well report do?
154 What does Option #75: Interpretation report do?
155 What does Option #81: Resynchronize IES/IESX well records do?
156 Is there a script to reformat LAS data to GQS format?
157 What does Option #82: Clear all IESX well information do?
158 What does Option #83: List corresponding IES/IESX well names do?
159 What is the difference between a traverse and a composite path?
160 Is there a way to not send the CGM file to the plotter in Seis%DV?
161 Can you input a scale such as 1:10000 when plotting seismic data?
162 Can I move time/surface slices from one project to another.
163 What do the save session files do?
164 What is the difference between surface slices and horizon slices?
165 What is SeisAn and what does it do?
166 What are Computed Seismic Attributes (CSA)?
167 What are Mappable Seismic Statistics (MSS) and what can I use them for?
168 What format must log data be in to load into IES Data Management?
169 Can DLIS files be loaded in IESX?
170 Can you load multiple wells with the same name but different API's?
171 How to use ASAP Parent/child feature.
172 What are the minimum requirements for posting wells in MapView?
173 Can you load log data from bottom hole up?
174 Are depth well paths assumed to be measured depth or true vertical depth?
175 Why does my dip/azimuth attribute post on only a small fraction of my survey?
176 Can you define a rectangular path on 2D data?
177 Padded dead traces after converting from IES to IESX
178 Deleted horizon in DataManager, but why is the horizon name still listed?
179 What are data item requirements needed to import 3D project? (Landmark to Geoquest)
180 Can IESX load Landmark's meta file format culture data?
181 What is required for importing horizon interpretation through DataManager?
182 Where are well symbols and their corresponding symbol codes shown?
183 What is the 'def' color in MapView?
184 What are AMP2_class, Quality and TTDT attributes?
185 How many attributes can be generated in one run?
186 What is the difference between a fault boundary set and a fault boundary?
187 Do padded traces take up the same space as a live seismic trace?
188 When will I be able to start my plot at a dead trace?
189 What happens if the class loaded is larger in size than the original survey?
190 Connection Accept Failed error running more than 6 CSA operations.
191 What does "Make sure the highest version for each seismic line is the original seismic data and NOT some processed version of the data" mean?
192 With the new well loader in IESX 10, will I still be able to load wells via IES Data Management?
193 Seismic surveys have vastly different amplitude ranges.
194 What is the difference of rolling locked view independently vs synchronously?
195 What is the difference between arrow and dither for slice posting button?
196 Can you edit a saved path?
197 What is a user data area and exploration data area?
198 IESX 10.X project limits.
199 Why does seismic class not display in the Seismic volume deletion window?
200 What is the purpose of Seismic history?
201 How are seismic amplitudes stored in IES/IESX?
202 IESX menus skewed, fonts and colors incorrect.
203 Changes made on markers in WellPix are not reflected in Seis 2DV/3DV or GeoViz.
204 Is GeoFrame 3.X multi-user?
205 What is modulus used for in seismic loading?
206 What does Geoquest Card Image format look like?
207 How does Scale Factor work in seismic loading?
208 Is there any way to speed up borehole posting on SeisDV under GeoFrame?
209 What does Option #36: Colormap import/export do?
210 What is the purpose of the Integrity Check?
211 In GeoFrame, where can I load GeoQuest formatted ASCII well files?
212 What does Option #73: 3D General data manager do?
213 What does Option #12: Rebuild Index do?
214 How to plot a time slice using a scale value.
215 Can you load a seismic line that has a topographic profile on top of the seismic?
216 How do you display data points without decimals?
217 Can I generate time slices that overlap with different time increments?
218 How do I move 2D data for mistie analysis?
219 How do you export a flattened volume to segy?
220 Do you need a disk of the same capacity as the seismic volume to load it?
221 How do you export 3D navigational data for just one inline?
222 How do I load a 3d survey with a different projection than my project?
223 What is the recommended 2D data loading sequence?
224 General description of 3D seimic loading sequence?
225 What information do I get from Scan Tape?
226 What does the option "Apply bulk shift of 0 ms by" used for in the Velocity Survey save menu?
227 Are log curves displayed in true vertical depth in Synthetics?
228 Why do faults on surface slices post with dots and crossplot symbols?
229 Why won't stacked tapes roll to next tape?
230 How can you decimate traces while loading 2D lines?
231 What does the IESX well loading format look like?
232 How do I unshare a project that will not unshare?
233 How do you load 2D segy with non-integer sp increments?
234 What are the requirements for loading checkshots in IESX format?
235 2D navigation off from where it should be.
236 Algorithm used for Instantaneous Frequency and how the min/max values are treated.
237 What are the IESX limits in GeoFrame3.X?
238 How can you move a seismic loading definition from one project to another?
239 What does Interpretation > Attributes do?
240 Why is the depth/time scale different within and outside of a synthetics panel?
241 Why is seismic display blank when using survey as source in gain control ?
242 Can I load interpretation exported from an IESX project into a project without seismic?
243 What is the best way to set the gain control for seismic display?
244 What type of data can be used as Input Data types for gridding?
245 What byte locations does Segy export use for the cdp and line numbers for 3D data?
246 Why is the cursor not tracking from Seis3DV/2DV to basemap ?
247 What are the common scaling factors for MapView?
248 What does "this will overwrite the tar file" mean in exporting markers to IES?
249 What is the format of an ASCII file output of XYZ data, grid, and contour data?
250 Information for the 9X to 10X upgrade utility and the amount of free space needed to upgrade
251 What is the origin attribute?
252 Can you crosspost interpretation on a time slice?
253 Where is the Project Converter located?
254 Is there a limit to the number of subdirectories in a DSL?
255 How is seismic data stored in IES and IESX
256 Missing buttons and incomplete, wrong size windows.
257 What does Grid Coverage do?
258 How many cdp/sp pairs can be entered while loading seismic?
259 Many null values in mistie estimation
260 What is a bat or cat file?
261 What happens to WELL DATA when upgrading from IESX 9pX to 10pX.
262 What type of information does ' Well penetration ' provide?
263 What is "Definitive check-shot" used for under Wells > Time/Depth?
264 What is the required information to load a well?
265 How many deviation surveys can be loaded at a time in Load well info?
266 Deleted interpretation, but do not gain any disk space.
267 Computing instantaneous phase and getting attribute data instead of seismic
268 Suggested spanning criteria for interpretation/seismic DSLs.
269 In Load wells, what does the WEll ID Priority toggle do?
270 Measured depth markers do not show up on the 'Well Tops' list to transfer from IESX to CPS-3?
271 Fault boundaries will not transfer from IESX to CPS-3.
272 When extacting a wavelet from a 2D or 3D line, what are the diffrences between statistical & deterministic methods?
273 What is the paintbrush command under 'Seis3DV/2DV > Define' used for?
274 What are RAM volumes used for?
275 Why won't Utility #37 detect corrupt or missing shotpoint tables?
276 What are the restrictions for CGM file names?
277 Difference between 'CPS-3 IESX Link' and 'CPS-3 GeoFrame Link'.
278 Log curve NAME not available for selection in Synthetics.
279 Why can't I set the start and end cdp on the reference seismic line in the Synthetic layout?
280 What is the recommended wavelet length?
281 Why are the logs in the log track shifted from the ones in the synthetic panel?
282 What is the minimum number of samples needed to define a wavelet?
283 What does the ASAP_QUAL attribute do?
284 When I open a saved layout, why aren't the saved logs displaying?
285 Do I need to convert my logs to time to display them in Synthetics?
286 What are the horizon names created when you run 'Areal > Peak/Trough...'?
287 What types of things can you do in 'Velocity survey' mode in synthetics?
288 Are there any 'helpful hints' when defining a drift curve?
289 How are Optimal trace and Optimal time values created for Deterministic method?
290 Do I need a density curve when using synthetics?
291 Why won't lithology fill become active for me?
292 What is a Drift curve?
293 Data Input/Output - What files can be read and what can be written in MapView?
294 Can you load into one survey, different classes with different sample rates?
295 Can you import interpretation with a different projection into the project?
296 Markers and the significance of marker indexed as MD, TVD or TIME.
297 MapView file description.
298 GeoFrame 'Command Line' commands and their functionality.
299 Can you post curves on horizontal boreholes?
300 What are the numerical values for colors used in import/export interpretation?
301 Can you see time slices in MapView?
302 Why are my 2D lines not appearing in Surface Cut list?
303 What is the format definition of an ASCII CAD file?
304 In the post order listing, what does the SX,CX, etc mean?
305 What are some good examples of using the .OR. and .AND. options in Combine Grids?
306 Why doesn't the borehole path display on each traverse panel?
307 Where to find the import/export card image format information in online help?
308 What does the Auto save do when the option is turned on during Areal snap?
309 Will loading more information into wells with overwrite affect existing markers?
310 Can you limit the file size of a segy export?
311 What is the recognizable 'NULL' value for BasemapPlus ?
312 Well posting symbols changed after project upgraded from IESX
313 Can a GeoFrame IESX project display on more than 2 screens?
314 What happens when you bulk shift by a fraction of a sample?
315 How do I replace a bad trace?
316 What do the direction arrows in Correlation Mapping mean?
317 Why is it taking so long to share a 3D survey?
318 After doing paintbrush interpolation on a horizon why does the amplitude attribute not post as interpolated?
319 Can two grids be added together that have different units in BaseMap Plus?
320 Surface associated with marker was deleted. How to post the marker now?
321 How is the RMS amplitude computed?
322 My snap window doesn't always seem to be utilized, why not?
323 How many horizons can AutoPix pick in one session?
324 My survey is larger in Basemap than the actual data
325 Where do cgm files created in GeoFrame IESX go?
326 What is the null amplitude value for horizons exported to an ascii file?
327 Where do I define my roll parameters in GeoFrame?
328 Calculating instantaneous frequency gives poor coverage over interpretation.
329 How do I receive an area readout in square meters using the planimeter?
330 Why do my markers not post at the correct time after changing assocaited checkshots?
331 Why does the decimated volume from SeisAn have the same size as the original?
332 What rules restrict survey origins, and what are their disk-space implications?
333 How is seismic data scaled in IESX vs. IES ?
334 Can you load log curves in time?
335 What are the units of time for entering checkshot data?
336 Why won't my markers display on Synthetic?
337 What projection will horizon XY data be exported in?
338 Why are the grids and contours not honoring the Map Appearance ordering?
339 Why can't I see all log curves in the Synthetics log track?
340 How can I clean up my grid in GeoFrame 3.5?
341 What happens to the interpretation if I delete and reload 2D navigation?
342 Why do my exported faults have negative trace numbers?
343 How can I post the horizon origin attribute?
344 How do you turn off the highlighted line so that it doesn't display on the plot?
345 Why is my log curve not available for posting on the seismic?
346 What exactly does the Scatter Data Decimation option do for Basemap gridding?
347 Where do I go to set line selection as Segment mode?
348 Why won't the fault boundaries turn off when not selected in Post Interpretation?
349 Why won't my fault boundaries post for the active horizon?
350 What does "Tubular extraction" do?
351 How do I retie all my 2D lines?
352 Ability to broadcast wells from the General Data Manager to Basemap to create a well set?
353 Without continual updates will IESX 10.2 continue to perform in Y2K?
354 DSL space available is reported incorrectly on SGI.
355 Can the well symbol size be changed for display?
356 Why are my fault boundaries posting one color?
357 If more than one deviation survey is loaded to borehole, which one is posted in basemap?
358 What is required for importing fault contact interpretation through DataManager?
359 What is required for importing fault cut interpretation through DataManager?
360 What is required for importing fault trace interpretation through DataManager?
361 How to load navigation from SEGY trace headers without loading every point.
362 Why are some of my 2D shotpoints not displaying in the readouts in Basemap?
363 Why after deleting an horizon attribute does it still appear in the lists?
364 What is the difference between Clipping Surface and Inclusive Data boundaries?
365 Why is the borehole depth in TVD/MD posting in Basemap different from the Bottom Depth?
366 What does Option #40: Delete culture data do?
367 Why doesn't anything happen when Option #40: Delete culture data is selected?
368 Why are color filled contours displayed after gridding when only line type was requested?
369 Why is the xyz file I loaded through Geoshare not posting on Basemap?
370 Why is gridding slower in GeoFrame 3.5 than in 3.1 when using the default settings?
371 What is the "Convergent/Blanking" algorithm in Basemap Plus?
372 What is the difference between User symbol and Borehole symbol in Borehole Appearance?
373 Why is the saved session not working?
374 Why are my markers posting in the wrong place?
375 What is the purpose of the Synchronize function (button) in the Share manager?
376 How can I tell which curves are loaded for which well?
377 What are the projection methods used to display boreholes in GeoFrame 3.5?
378 Does the Share function overwrite navigation in my interpretation project?
379 Can you open a GeoFrame 3.1 project in GeoFrame 3.5 without upgrading it?
380 What does 'Maximum time difference (ms)' in the Areal Smooth window mean?
381 Why is the Fault Boundary Mode in the Grid Editor not working?
382 All markers did not upgrade when the project was upgraded from IESX to GeoFrame 3.1.
383 Can 2D lines be simultaneously scrolled horizontally in multi-view layout?
384 What are the notations [udo] [ud-] in SeisDV horizon/fault interpretation lists?
385 Why doesn't convergent gridding honor fault boundaries correctly?
386 What is the Working datum reference toggle in the Load well info window used for?
387 Can you export seismic on simple/composite traverses without generating a 2D line?
388 Why is the borehole path posting, but not the borehole name?
389 Can SEGY data be exported using a polygonal path?
390 Class priority is not honored when a composite path is made.
391 How come my grid units on spectrum bar display UNKNOWN?
392 All my attributes are gone when I go to post interpretation.
393 Where do you edit grids and contours?
394 Can I delete my contacts on basemap?
395 "The selected class has different survey extent than the existing survey"
396 Why are my fault contacts not always assigned when my faults are?
397 What does Option #57: Correct duplicate seismic brick maps do?
398 What does Option #58: Fix duplicate interpretation brick maps do?
399 What are the minimum requirements to import fault boundaries into IESX?
400 What files are created in IESX database when I save the wavelet in Synthetics?
401 What does Option #55: Clean bad share links do?
402 Is it possible to surface cut a CPS-3 grid to an IESX horizon?
403 How can I transfer catographic data from IESX to CPS-3 in GeoFrame 3.5?
404 What's new in GeoFrame3.7 Basemap.
405 Can you shift a deviated synthetic?
406 Do you have to post all the grids you want to use in multiple grid operations?
407 What's new in GeoFrame 3.7 Computation Manager?
408 What's new in GeoFrame3.7 IESX Plotting?
409 What are the required fields to ASCII import interpretation?
410 What does ??? in the Synchronize dialog box mean?
411 How is grid rotation defined?
412 Where can the user control the map layer posting order?
413 Proman restore from multiple tapes or disk files returns "invalid filename ,n.
414 What does Option #26: Clean up unreferenced data do?
415 What is BasicTD?
416 Can you overlay interp from a nearby line to help interpret noisy data?
417 IESX does not recognize directory name that has a space as one of its characters.
418 How is grid rotation defined?
419 How can I check to see if there are tabs in my nav/well/carto file?
420 What happened to Correlation Mapping in GeoFrame 3.7 Computation Manager?
421 How can I determine the corner points to load a 3d survey if none are provided?
422 Why does the CPS3 link transfer horizons in seconds rather than ms like it used to?
423 Displaying markers by marker source: Why don't all source names show up on list?
424 Where can I find the library of GeoFrame Well Symbols?
425 Well symbols will not post although the well path and well name do appear.
426 What data is recommended for use in the time/depth pair selection?
427 How can I generate a variance cube from a flattened volume?
428 Which DSL does a wavelet get saved to and what are the file names generated?
429 How can I determine the projection of an IES project?
430 What is the cpswork.1cps file and what does it do?
431 How can I view a 32 bit floating point header word in SEGY dump?
432 A simple method to dump Inline and Xline numbers that are in the extended header.
433 What does the 'Adjust navigation' button do under the Edit 2D locations option?
434 What is a coordinate scaler and how can it impact 2D seismic data?
435 Why does Areal Peak/Trough seem to be picking outside the parameters I input?
436 Attribute erase does not delete the horizon.
437 Can you rename an IESX project in GeoFrame without making a copy?
438 What does the "Share project..." button do in the Utilities Panel?
439 What are some of the terms used in IESX Data Manager?
440 What does IESX_Util Option #72 do?
441 How do the `Output Increment' parameters work in Export Interpretation Data?
442 Interpretation merge does not completely overwrite existing horizon.
443 Spectrum Bar Appearance: User Defined Placement is greyed out.
444 Map Annotations: North Arrow, User Defined Placement is greyed out.
445 Map Annotations: Map Scale User Defined Placement is greyed out.
446 What is the User > Move Items option for and how does it work?
447 How can I query for all boreholes in a borehole set that have some attributes
448 Where are IESX 10.2 horizon interpretation import/export format files stored?
449 Where are GeoFrame default interpretation import/export format files stored?
450 What determines the sign of isochron/isopach maps?
451 Why doesn't the Query Tool populate the borehole set?
452 Why doesn't my horizon attributes show up in the attribute list?
453 Why are the amplitudes not being extracted for a horizon?
454 Is navigation data contained in the trace headers of 2D data exported from SEGY?
455 Why is the aspect ratio/scaling for the timeslice incorrect?
456 What is the KEEP_DISK_SPACE variable for?
457 Where can information on datums and ellipsoids be found?
458 Where are GeoFrame IESX saved sessions stored?
459 New Features in GeoFrame 3.8 IESX MisTie.
460 Can I change projection/datum of a project to share?
461 Major Fixes in GeoFrame 3.8 IESX Basemap.
462 Major Fixes for GeoFrame 3.8 IESX Data Manager > Interpretation.
463 Guidelines for using GeoFrame Projection Systems with IESX.
464 Major Fixes in GeoFrame 3.8 IESX Environment.
465 Major Fixes in GeoFrame 3.8 IESX BasicTD.
466 Major Fixes in GeoFrame 3.8 for IESX SeisDV.
467 How do I restore an IES project?
468 I loaded the tvd and tvdss with negative signs in front of numbers, is this ok?
469 Where do I build a traverse path or "user track"?
470 How do I build a simple traverse in GeoFrame 3.7?
471 How can I display previously saved traverses on the basemap?
472 Why is my seismic data blocky along a traverse?
473 How to create a traverse spanning non-adjacent surveys (use of disjoint mode).
474 Why do horizons become dashed or dotted when interpreted on steep slopes?
475 How does the least squares algorithm determine the search radius?
476 What is grid coverage, and does it affect the algorithm?
477 How does the "convergent blanking" algorithm work?
478 How amplitude trace scaling works in GeoFrame.
479 Can I load color-filled cartography?
480 Why do I want to save my traverses?
481 Why is my imported depth horizon not recognized in Basemap?
482 What is the maximum number of 2d navigation points that can be loaded?
483 What is the easiest way to create a Variance Cube from a flattened volume?
484 How to control spectrum range coloring beyond min & max range.
485 Is the clipping surface save menu limited in the number of horizons seen?
486 How does 'User Reference' Amplitude Normalization actually work?
487 Why aren't surface penetrations saved to the database after 'Save'?
488 Specific rules for posting horizontal/upturned boreholes on SeisDV.
489 Why do my contours appear smoothed when using convergent gridding with faults?
490 Can you merge interpretation between GeoFrame 3.8 and GeoFrame 3.7 projects?
491 What does this upgrade log message mean `Error opening map content file - continuing...'
492 Why does upgrade from GeoFrame 3.7 to 3.8 find map files but say they are not converted.
493 What is wrong when multi-horizon merge gives error: Get selection in areal merge?
494 Is there a limit on the size of the SEG-Y file for loading from disk?
495 Preferred checkshot usage rules.
496 Import Zmap .DAT file in ASCII Load>ascii format>Zmap_grid_x. Grid is deformed.
497 Where do I change the IESX_METAPATH ?
498 I cannot get more than the first 2D line on tape to load (using a Sun).
499 Why does my SEG-Y synthetic print as a straight line in a scaled plot?
500 What trace header byte locations are being Mapped by Seismic Mappable Statistics?
501 What is the best way to make Horizon slices?
502 What is the secondary event in Peak/Trough based on?
503 Why doesn't my restored project have any seismic data?
504 How does the mailbox icon work in the SeisDV window?
505 Is there a quick way to delete a temporary AOI?
506 Seismic Data Loading of IESX SEG-Y files larger than 2 Gb.