Topic:
How to reduce log values by a given fraction.

Description:
I have a sonic log which was writen as us/m, but I loaded it as us/ft.
I want to keep it in us/ft to match my other logs, but all the sonic values
I have are 1/3.28 of what they should be.  How can I fix this?

Solution:
1.) LPView > Log Preparation #2 > Edit Log #1

2.) Keyboard Edit #2 > Scale #5 > Parameters #1 > enter the depth start and end
 zone then enter 3.28 in the scale factor, choose 'Multiply' as the math
 operation > exit.

3.) Choose the curve to edit (single curve only) Change Curves #2 >
 Compute/Display #3 > enter the new units 'us/ft' > Save Data #5 > Save Data #1




Last Modified on: 01-SEP-98