Topic:
What does Option #82: Clear all IESX well information do?

Description:

Solution:
This option deletes all well data from the IESX database. The IESX well database
is then reconstructed from IES as defined below:

1.) This option deletes markers from IESX.  Markers must be exported back to IES
    using DataManager > Wells > Markers > Export (exports TVD and time only) to
    IES before running this option.  After option #82 completes the markers can
    be re-imported by DataManager > Wells > Markers > Import from IES.

2.) Well sets are deleted.

3.) IESX deviation survey information is written to the IES database, deleted
    from IESX and restored back from IES to IESX.

4.) DVT's flagged as definitive check shots are unflagged, and all DVT's are
    disassociated from their wells. DVT's that originated as IES checkshots are
    deleted, then reloaded in their original form and re-associated. If a well 
    with an IES checkshot has an IESX DVT associated with it, the IESX DVT is
    deleted; the IES checkshot is reloaded and becomes associated with the well.

5.) All IESX log header information is retained except for measurement (MD, TVD,
    TIME) and generic log type; these will have to be reset in DataManager >
    Wells > Wells > Log header.

WARNING:

1.) Have a current backup before proceeding with this option. Or, use Geoshare
    to write well information to an RP66 file (Geoshare will convert MD to TVD).

2.) An IES Data Management rebuild must be performed before proceeding with
    option #82. Please refer to the 'How to' in IES Data Management on this
    procedure.

3.) Option #81 automatically runs prior to option #82 if option #81 has not
    already been run.

4.) Run Option #83 first to list errors and/or bad wells.


PROCEDURE:

1.) Option #1 - Initialize access to data area
    - Enter the project name and password
    - Enter #1 to access exploration data area type

2.) Option #82 - Clear all IESX well information

WARNING:
If you have not yet done an IES rebuild, using this option could potenially
delete all of your wells premanently. Do you wish to continue (Yes/No)?
    - Select Yes, if IES rebuild has been done.

3.) Option #2 - Terminate access to the data area

4.) Option #99 - Exit IESX_Utilities




Last Modified on: 24-NOV-98