Topic:
Ability to broadcast wells from the General Data Manager to Basemap to create a well set?

Description:
 

Solution:
Not directly since the Create Set menus do not contain an ITC (Inner Task
Communication) connection.   As a workaround, broadcast the wells from the
General Data Manager, this will highlight the wells on Basemap, then
create the well set.

WORKAROUND:  
  1.) Post all wells on Basemap.

  2.) In General Data Manager, expand out to Boreholes and select the boreholes
      you want to send to Basemap.  Broadcast the boreholes to Basemap by
      opening the 'door' (ITC connection) and selecting the broadcast icon. 
      The 'door' must be open in Basemap in order to receive the boreholes.

  3.) In Basemap > Edit > Borehole sets > Create Set from Map, select the
      highlighted wells in Basemap and create a new well set.

Alternative workaround is to use the query tool in Basemap to construct the
well set.

RESOLUTION:  Corrected in GeoFrame 3.7.  
             The Create Well Set menus will have ITC connection icon.



Last Modified on: 23-MAR-99