Topic:
Well symbols will not post although the well path and well name do appear.

Description:
The well symbols are posting in basemap.       

Solution:
Go to the IESX Data Manager > Wells > Wells > Check the Posting Symbol for
the wells.  Most likely the Posting symbol is blank.  This would indicate that no
symbol was loaded when the wells were loaded.  The symbols are posting in Basemap
because the Well appearance is set to use User symbol instead of Well symbol.
Mapview does not have the option of posting the wells using a User symbol.
 
The Well symbol can be updated so it will post in Mapview.
1) IESX DataManager > Wells > Wells

2) Select the well/wells from the Select well list

3) Click on the empty white box to the right of Posting Symbol to open the
    Symbol Selection window

4) Select the desired symbol (a red box will surround the symbol) > Dismiss

5) Update > Dismiss

6) Redisplay the well data in Mapview



Last Modified on: 17-MAR-00