Topic:
How to create a traverse spanning non-adjacent surveys (use of disjoint mode).

Description:
It is possible to create a traverse on surveys not overlapping or adjacent
by using the Disjoint Mode of the traverse function.       

Solution:
1. In BaseMap Plus > Edit > Seismic Traverse Paths > Composite.

2. Mouse button three  Control
   Toggle from Contiguous Mode to Disjoint Mode > Close.

3. Start picking points in survey_1 and select  Break. Then move the cursor
to survey_2 and repeat the process, ending the traverse with  Break.

4. Select  Terminate to send the completed traverse to SeisDV.

5. Select  Save to save the traverse.  
 



Last Modified on: 09-MAY-00