"How To" (hints) reported by GeoQuest (as of 4/24/2001)


001 How to export 2D navigation to ASCII file.
002 How can I keep AutoPix from picking in a certain area of the survey?
003 How can I make AutoPix pick only within a particular fault block?
004 How to share seismic, merge interpretation, and delete duplicate faults.
005 How to load 2D navigation data after SEG-Y data has been loaded.
006 How to add disk space when DSL's are full.
007 How to create a color table.
008 How to rename an attribute in MapView.
009 How to reverse the colors on color bar.
010 How to post wells and cartography.
011 How to interpolate interpretation using Surface Cut.
012 How to restrict gridding to a polygon(s) in 10.2.
013 How to specify no rewind for tape(s) during 3D segy loading.
014 How to copy interpretation from one survey to another.
015 How to restrict gridding to only one 3d survey.
016 How to merge two horizons into one.
017 How to post the TD values for wells in Basemap.
018 How to determine the associated fault name of a posted fault trace in Basemap.
019 How to checkshot correct a sonic log and use that calibrated log to create a synthetic.
020 How to generate time slices.
021 How to change the MapView title block.
022 How to copy seismic data from one project into another.
023 How to run areal amplitude extraction for a horizon?
024 How to post bottom hole locations.
025 How to copy mistie data back to the seismic project.
026 How to delete cartographic data from project.
027 How to create an isochron map.
028 How to know which boreholes contain sonic logs for creating synthetics in GeoFrame/IESX
029 How to get ASCII output of defined polygons.
030 How to post boreholes on a seismic section in IESX 10.2.
031 How to rebuild the project inventory.
032 How to export xyz, grid, contour and fault traces to an ASCII file.
033 How to transfer MapView grid, contour or xyz files to another IESX project.
034 How to delete faults and horizons?
035 How to copy fault traces between surfaces.
036 How to run an areal horizon copy in Seis3DV/2DV?
037 How to post a seismic survey on the Basemap.
038 How to time shift faults.
039 How to move IES markers from one project to another.
040 How to get a list of the wells in a project in IESX 10.2.
041 How to display a time contour over the amplitude surface.
042 How to input 3D interpretation as a grid instead of xyz points.
043 How to post seismic picks, without grid or contours.
044 How to make fault traces post in fault color.
045 How to create a scaled plot in Mapview.
046 How to delete grid data using polygon(s).
047 How to delete xyz data using the histogram.
048 How to copy a MapView color map from one project to another.
049 How to sum amplitudes for a peak and a trough horizon.
050 How to surface cut a grid to new horizon in Geoframe.
051 How to exclude null values from grid read into MapView.
052 How to display contours only.
053 How to clip anomalously large amplitude values while loading.
054 How to patch an existing IESX project.
055 How to import depth markers from IESX to CPS-3.
056 How to delete grids, contours, scatter sets and boundaries.
057 How to change interpretation 'cursor tracking' from rubberband to point mode?
058 How to create a depth map using one velocity value.
059 How to convert seis extract attribute to time attribute.
060 How to convert a grid to an IESX horizon.
061 How to stop a path selected in Basemap from posting in multiple Seis3DV/2DV windows.
062 How to load GQS and/or LIS format log curves.
063 How to post UWI rather than well name on the Basemap.
064 How to read amplitude from Seis3DV/2DV display?
065 How to invoke stand-alone CPS-3 Link.
066 How to output a well report with associated formation/tops.
067 How to create a checkshot from a sonic for IESX Synthetics in GeoFrame 3.0.
068 How to multiply a grid by a constant.
069 How do I combine multiple horizons (named differently) into a single horizon?
070 How to edit/remove section of log in LPView
071 How can I interpret an overhanging salt dome?
072 How do I modify a colorbar or create a new colorbar?
073 How do I remove an old image block that keeps coming back when I change lines?
074 How to limit the posting depth of my wells.
075 How to change the grid cell size.
076 How to edit a log curve that has cycle skipping or bad portion of log
077 How to delete a portion of a sonic log.
078 How to reassign faults and horizons.
079 How do I receive a quick amplitude readout of my seismic data?
080 How to move a project to another location.
081 How do I subtract a DC-bias from my acoustic impedance volume?
082 How to delete interpretation in SurfaceSlice.
083 How to determine Dominant Frequency of input data
084 How to post mistie points on Basemap.
085 How to delete MapView parameter files.
086 How to patch an archived project into IESX.
087 Project Upgrade Preparation: IESX 10.x to GeoFrame 3.1.x
088 How to configure tape stacker for Solaris.
089 How to change the contour interval of a grid.
090 How to copy colormaps to another project.
091 How to load LAS format logs into IESX.
092 How do I find where my CGM plots are going?
093 How to save a grid, contour or scatter set.
094 How to write SEGY files on tape to a disk file using tcopy.
095 How to correct 2D lines using a 3D survey as the reference
096 How to copy well loading definition formats from one IESX project to another.
097 How to do Mistie Analysis on a horizon
098 How to convert a horizon to a fault and vice versa.
099 How to load tops from an ASCII file.
100 How to manually enter IES tops.
101 How to output well logs in ASCII format.
102 How to determine the Administration password.
103 How to display the numeric values of a log to the screen.
104 How do you save CGM files?
105 How to post scatter sets.
106 How to load log curves with uneven sample rate.
107 How to see average value of a log over a given depth.
108 How to automatically interpolate over gaps in my log.
109 How to null log(s) where the hole washes out.
110 How to output a log from a well that is beyond the 999th well.
111 How to compute porosity from velocity, density, or dt.
112 How can I find an equation which approximates my log?
113 How to resample a curve.
114 How to interpolate a horizon posted in Basemap?
115 How to stop interpretation from posting as dots in highly dipping area?
116 How do I get rid of the dangling(fault Intersections)?
117 How to convert a fault to a horizon.
118 How to configure project DSLs to make efficient use of large disks.
119 How to delete surface slices.
120 How to create depth maps in BasemapPlus
121 How do you reverse the plot direction (hard copy) for 2D lines?
122 How to copy interpretation using Interpretation Merge and related tips.
123 How to copy interpretation using Export and Import and related tips.
124 How to perform tasks in IESX 10.X IESX_Util.
125 How to perform tasks in GeoFrame IESX_Util.
126 How to move fault traces from one horizon to another.
127 How to load Synthetics in segy format.
128 How to delete the Save Session files.
129 How to generate a 2D line from 3D for Mistie.
130 How to create a depth map using an external velocity file.
131 How to create a depth map using marker velocities.
132 How to load a DVT and associate to previously loaded wells.
133 IESX 10.2 How to copy fault traces from one horizon to another using Export/Import.
134 How to create a depth map entering velocity points manually.
135 How to delete a project with missing files.
136 How to delete a user from IESX.
137 How to deallocate a locked project ?
138 How to start ASAP
139 How to export fault traces.
140 How to transfer wells from project to project.
141 How to combine parts of logs to form a single log (do not shift depths)?
142 How to stretch or shrink a curve in LPView.
143 How to block a log curve.
144 How to view a histogram of log curve values.
145 How to create and map an isopach in IESX 10.2.
146 How to produce a scaled plot of logs from a single well.
147 How to reassign Fault Cuts on Basemap
148 How to add DSLs (disk storage locations) to a user.
149 How can I get CGMPIP output from IESX 10.x?
150 How to segy export a traverse or composite path.
151 How to segy export a traverse or composite path.
152 How to export interpretation in mfd format with time in msec.
153 How to produce a scaled plot of logs from multiple wells.
154 How to create a project.
155 How to map formation tops in depth.
156 How to find the range and average values of multiple curves.
157 How to delete SeisAn computed data.
158 How can you load more than the limit of 90 tops via IES Data Management?
159 How to delete formation tops in IES Data Management.
160 How to delete Mappable Seismic Statistics and/or Computed Seismic Attributes.
161 How to load navigation from header when coordinate scalar is incorrect.
162 How to generate a frequency spectrum for seismic data.
163 How to get a user application (IESXDK) listed in Computation Manager.
164 How to export 2D navigation to ASCII file (10.2).
165 How to make a composite path.
166 How to copy fault trace to another horizon.
167 How to import seismic data from Landmark into IESX.
168 How to load an XYZ file from landmark into GeoQuest IESX?
169 How to import Landmark well log data into IESX.
170 How do I copy 2d trace data from one project to another, and maintain class designation.
171 How to delete time slices.
172 How do I generate surface slices?
173 How to create a borehole set that covers only a specific area.
174 How to load an XYZ file with positive and negative Z values.
175 How to get ASCII output of defined polygons.
176 How to set a preferred fault boundary set.
177 How can you decimate traces displayed in Seis3DV/2DV?
178 How to import horizon interpretation which is not in one of the standard formats.
179 How can you grid only in a user defined area?
180 How to Surface Cut faults in GeoFrame.
181 How to delete a named AOI from Basemap?
182 How to create a well set using the Query tool.
183 How to change the position of a synthetic in Seis3DV/2DV?
184 How to write mistie values out to a file
185 How to create a composite path through multiple 3D surveys.
186 How to Surface Cut a grid back to a new horizon.
187 How to rotate text entries (e.g., labels for path names).
188 How to delete annotation from a user defined layer.
189 How to adjust the highlighting contour interval.
190 How to load culture data in multiple applications.
191 How to find out what icons mean?
192 How to delete grids, contours, scatter sets, and boundaries.
193 How to enter a fault boundary.
194 How to rebuild user index files using option #12.
195 Hints for Surface slice use
196 How to magnify seismic without zooming while picking?
197 How to build a query to find out which wells have synthetic seismograms in them.
198 How to determine an unknown project password.
199 How to change IESX project ownership/password.
200 How to add a new disk or tape drive to IESX 10.X.
201 How to reverse polarity of seismic while loading.
202 How to load Zycor xyz and/or grid files into IESX.
203 How to delete the Save Session files.
204 How do I adjust log curve posting in time along my wellpaths?
205 How to export tops/markers from IESX.
206 How to delete user's saved sessions.
207 How to create a clone of an IESX 10pX project.
208 How to compress user's saved session files.
209 How to set the colorbar to have min/max amp on left/right side of colorbar
210 How to load marker data from an ASCII file in IESX.
211 How to make a synthetic and tie it to the seismic.
212 How to manually add markers in IESX.
213 How to create a DVT from a sonic that will correctly position my curves and markers.
214 How do I create a contour set for the results of a unary or binary grid operation?
215 How to restore GeoFrame3x project from tape.
216 How to use Project_Rename to create of copy of an IESX project.
217 How to create a listing of all the 2D lines in a project with SP & CDP.
218 How to bulk shift interpretation.
219 How to fix blank time slices.
220 How to bulk shift a DVT.
221 How to change Administration password in IESX 10.X
222 How to load 3D seismic using xy limitations.
223 How to work with inversion data.
224 How to 'cut out' 3D seismic already loaded.
225 How to get a neatline to cover newly loaded surveys
226 How to Surface Cut a horizon to a grid without interpolating the data.
227 How to create a composite well path.
228 How to change the orientation of a time slice
229 How to post cartography on seismic section
230 How to move files from one DSL to another.
231 How to use an Input Data Boundary for gridding.
232 How to load 2D without gaps in the cdp/sp pairs.
233 How to select a line from Basemap when two surveys completely overlap each other.
234 How to adjust contour intervals.
235 How to overlay one class of seismic data onto another class.
236 How do I rotate my plots manually using ZEH
237 How to load multiple seismic files from a single tape?
238 How to segy export 2d lines so there are end of file marks (EOF) between files?
239 How to delete saved paths.
240 Interpretation won't post on BaseMap - no error messages
241 How to post attributes generated in Computation Manager.
242 How to Project Convert an IES project to IESX.
243 How to upgrade IESX project from 9pX to 10pX.
244 How to retain a working copy of an IESX 10px project and upgrade it to GeoFrame.
245 How to remove shared references in a clone project. Master project previously upgraded.
246 How to upgrade IES users in iescon.
247 How to convert fault traces only from IES to IESX.
248 How to get data values for the point where a wellpath intersects the horizon.
249 How to upgrade a 9pX project to 10.X
250 How to upgrade IES users to 10pX using iescon.
251 How to convert a project from IES 9.06 to IESX 10.2.
252 How to limit your borehole trajectory without a checkshot.
253 How to copy cad files from one project to another.
254 How to determine size of vertical, time slice, or surface slice volumes.
255 How to add more disk space to a project.
256 How to delete cartographic data in GeoFrame IESX.
257 How to copy a portion of a 3D survey into another project.
258 How to rename a well.
259 How to load SEGY data from a remote tape drive.
260 How to SEGY export a time range of seismic data.
261 How to transfer cartography from IESX to CPS-3.
262 How to load seismic with an non-standard EBCDIC header length.
263 How to backup an IESX project
264 How to change no event color in surface slice.
265 How to use snapshot to plot wavelets displayed in the synthetics.
266 How to change posting colors for wells, data points, etc.
267 How to remove the 'Depth vs Time' track or other tracks from the synthetic layout.
268 How to display more than one log curve on my synthetic layout.
269 How to change the scale of logs displayed in synthetics.
270 How to change the width of a various tracks in synthetics.
271 How to transfer 3D locations and survey geometry from IESX to CPS-3.
272 How to save impedance and velocity logs from synthetics module.
273 How to display variable intensity seismic on my synthetic.
274 How to import loading definition files.
275 How to bring up other saved map pictures in a project?
276 How to change the well in Synthetics by selecting it from the Basemap.
277 How to post a well on the seismic panel in synthetics.
278 How to post markers along the well bore in Seis3DV/2DV.
279 How to edit the marker color for posting on Seis2DV/3DV.
280 How to select a well off the Basemap for use in Synthetics.
281 How to delete a project from the command line.
282 How to get a listing of GeoFrame accounts from the command line.
283 How to deallocate a GeoFrame project from the command line.
284 How to upgrade an IESX 10px project to GeoFrame at the command line.
286 How to find out what all the icons are in the Synthetic window.
287 10px Well Data Loading and Storage, what files hold what data items?
288 How to load an XYZ file from Landmark into IESX
289 How to resample seismic data when loading.
290 How to create an isochron map in Seis3DV/2DV.
291 How to configure a tape drive to load seismic data into IESX.
292 Detailed description of how to load a 3d survey.
293 How to make a copy of a checkshot within IESX.
294 How to delete grids and contours associated with surfaces(GF3.1).
295 How to delete interpretation from an unsaved traverse path.
296 How to reverse polarity on IESX seismic data.
297 How to create a datumed horizon.
298 How to get a listing of GeoFrame users at the command line.
299 How to add data to the start of a 2d line.
300 How to change an attribute name in GeoFrame.
301 How to delete interpretation from an unsaved traverse path.
302 How to bulk shift a few 2D seismic lines in a survey.
303 How to select which duplicate log curve code will post on the seismic display in GeoFrame 3.1.x.
304 How to export my saved synthetic so I can send it off to a processor.
305 How to display BasemapPlus on the secondary screen
306 How to start ASAP (Automatic Seismic Area Picker) in Basemap
307 How to exclude null values in gridding operation of borehole data
308 How to change display units for xy coordinates on BasemapPlus
309 How to remove seismic survey from BasemapPlus
310 How to retie a 2D line?
311 How to open a different saved map
312 How to upgrade IESX 10.x to GeoFrame with different $IESX_CONFIG files
313 How to remove culture data piece by piece.
314 How to start IESX and related utilities from an xterm.
315 How to plot CAD file on a scaled plot.
316 Snapping suggestions
317 How to upgrade user defined colormaps (colorbars) from 10.2 to GeoFrame.
318 How to post more than one synthetic on a seismic section.
319 Unable to define zooming area on BasemapPlus
320 How to load interpretation into a project without seismic.
321 How to restore an IES project and convert it to IESX.
322 How to add a directory to IES where users can create projects and store data.
323 How to get a project to recognize a .ldfx file taken off a tape.
324 How to set the flag for seismic data loading to not calculate the statistics.
325 How to create a DT curve from a resistivity curve.
326 How to change the posting color of fault boundaries in BaseMap?
327 How do you transfer a horizon back into IESX (GeoFrame) from CPS-3?
328 How to put horizon/fault interpretation values along 2D lines and 3D surveys?
329 Is there any way to get my scaled seismic, CGM plot file into something like Power Point?
330 How to find 'spikes' in seismic data, and get rid of them.
331 A detailed guide on creating a user-defined basemap
332 How to delete Post Order parameter files.
333 How to add a user to IES.
334 How to setup a digitizer in IES on a SUN machine?
335 How to get an ASCII printout of well deviations.
336 How to create a GeoFrame project from the command line.
337 How to import a catalog from the command line.
338 How to change a password of a GeoFrame project from a command line.
339 How do I display the marker name rather than the surface name in Seis3DV/2DV?
340 How to import disk settings from one catalog to another catalog from the command line.
341 How to add a user to IES.
342 How to rotate the position of a traverse around a well.
343 How to delete a catalog or project by command line in GF3.0.
344 How to integrate GeoFrame applications in Geonet.
345 How to integrate IESX utilities into Geonet.
346 How to delete the Charisma part of a GeoFrame project from the command line.
347 How to obtain a report of the Oracle tablespace utilization.
348 How to grid/contour a time slice.
349 How to display a list of the Oracle tablespace utilization and contiguous free space.
350 How to post a time slice.
351 How to delete the horizon name as well as the interpretation.
352 Project password is not accepted when merging interpretation.
353 How to map null traces on a survey.
354 How to display CPS contours in Basemap+
355 How to release CSA license when it hung
356 How to set a fixed scale for Basemap
357 How to display time slice data in Basemap?
358 How to create fault boundaries in GeoFrame Basemap
359 How to have IESX remarks appear rather than the date in the seismic catalog.
360 How to generate multiple synthetics in one synthetic panel.
361 How to display the seismic to match the amplitude spectrum of time slices.
362 How to save a rolled traverse
363 How to delete an IESX 10.X project when the IESX software is not on the system.
364 How to upgrade IES users to 10pX using iescon.
365 How to find out what are the origin attributes of a horizon in GF3.5?
366 How to normalize the amplitudes of one survey to the amplitudes of another survey.
367 How to delete a fault boundary set.
368 How to delete Map Content and Map Appearance in General Data Manager
369 How to merge horizon attributes into one attribute
370 How to setup Hot Keys in IESX 10.X.
371 How to change the posting order of the Appearance Layers
372 How to post cartography/culture data on Basemap in GeoFrame 3.5
373 How to change the XY or Lat/Long tick annotation in GeoFrame 3.5
374 How to annotate depth along borehole.
375 How to copy items (scale, seismic, etc.) from one panel in my layout to another
376 How to get X,Y co-ordinates to display as the cursor tracks around Basemap.
377 How do I overlay VSP on my seismic data?
378 How to populate the Wells and Borehole Manager and/or the General Data Manager using Basemap.
379 How to hide selected layers on Basemap.
380 How to rename a horizon.
381 How to check what fault boundary is set prefered for a horizon.
382 How to delete a project after ordinary delete fails.
383 How to load shot points when the SEGY file contains duplicate shot points
384 How to combine two fault boundary sets into one.
385 How to move synthetic data from one GeoFrame project to another.
386 Project Upgrade Preparation: IESX 10.x to GeoFrame 3.5 through 3.7.1
387 How to create a list of 2D lines in a GeoFrame project.
388 How to rename an attribute in GeoFrame 3.5,3.6
389 How do I set my spectrum to user defined?
390 How to restrict gridding and contouring to a certain area.
391 How to define a traverse in GeoFrame 3.5.
392 How to create a composite amplitude grid, and honor data without filling holes?
393 How to move a 2d line created from a 3d traverse from one project to another.
394 How to determine line, cdp, X & Y corner points for irregular shaped surveys.
395 How to load 3D seismic data that contains decreasing CDP numbers.
396 How to flatten a 2D line and export to SEGY.
397 How to move synthetic data between IESX 10.x projects.
398 How to maximize Data Management efficiency with the IESX database model.
399 How to load decimated 3D volume
400 How to get newly loaded cartographic data to display on the Basemap.
401 How to delete traverses from Basemap.
402 How to post Surface Penetration values on Basemap.
403 How to load repeated shotpoints for a crooked 2D line.
404 How to change project password in GF 3.5.
405 Can I insert control points to guide gridding in GeoFrame 3.5?
406 How to convert fault grid to fault segments?
407 How to convert a horizon grid to fault segments and fault grid to horizon picks.
408 How to post specific markers in the marker track.
409 How to create an isopach map using well markers and a horizon.
410 How to setup loading of every other line of 3D survey.
411 How can I export 10px checkshot data to an ascii file?
412 How to copy a loading definition for well data between projects.
413 How to post well locations, paths, and names in different colors.
414 How to deallocate a project that will not deallocate.
415 How to delete grids, contours and scatter sets from BaseMap Plus in GeoFrame 3.6.
416 How to save customized user layers.
417 How to change the spectrum bar in GeoFrame 3.5.
418 How to change the color of fault boundaries.
419 How to post a horizon attribute in GeoFrame 3.6.
420 How to label deviated boreholes (wells) differently than straight boreholes.
421 How to select a specific curve to be displayed for a curve type in Seismic.
422 How to display your faults as symbols.
423 My faults are displayed as symbols, how can they be set back to line segments?
424 How to copy MapView grids, contours, and XYZs from IES to IESX.
425 How to find shared references to a corrupted master project.
426 How to create a list of IESX horizons and their attributes?
427 How to delete clipping surface boundaries.
428 How to delete clipping surface boundaries.
429 How to create a list of all grids in a project.
430 How to sort 2d line names in the destination list for Interpretation Merge.
431 How to limit the data posted in Basemap to a restricted area?
432 How to split a horizon into two different horizons for 2d data.
433 How to load 2d seismic with non_zero tfs that is not in SEGY header.
434 How to redirect the temporary logfile created during an upgrade.
435 How to export a grid to a ASCII file.
436 How to plot using a scale factor (i.e. 1 to 1000).
437 How to Surface Cut a grid to a horizon attribute.
438 No Sonic logs in project message. How to edit the log code.
439 How to display cursor location on all views with multiple views set in SeisDV.
440 How to post fault markers in SeisDV.
441 How to delete the data area of a project with the wrong revision level
442 How to bypass the update volume statistics when loading seismic.
443 How to load a 3D survey with line and CDP numbers combined in an ensemble header word.
444 How to edit amplitude attribute for a specific horizon?
445 How to add a Supplemental Readout to Basemap.
446 How to do multiple grid operations when there is a units mismatch between grids.
447 How to change the extents of a basemap.
448 How to save a basemap with interpretation.
449 How to add more than one checkshot to my borehole.
450 How can you change the Standard Readouts in Basemap?
451 How to delete parts within a grid?
452 How to copy interpretation between overlapping surveys in the same project.
453 How to display a user-defined section of seismic on another for comparison.
454 How to output a basemap in DXF format (Autocad).
455 How to change the projection for a basemap.
456 How to copy fault boundaries from one horizon to another.
457 How to load multiple offset surveys.
458 How to save, post and shift a synthetic on seismic.
459 How to transfer cartography between GeoFrame projects.
460 How to un-post fault boundary sets.
461 How to flip/reverse the posting of a log curve on the seismic window.
462 How to delete inclusive data boundaries.
463 How to surface cut a grid to new horizon in Geoframe 3.5, 3.6, or 3.7.
464 How can you output amplitude values at borehole surface penetrations?
465 How to copy a path from one project to another
466 How to remove the turning point lines from a traverse.
467 How to upgrade with minimum downtime and not have to copy the seismic data.
468 How to delete a log curve in IESX 10pX.
469 How to automatically post the active horizon from Seis3DV/2DV on Basemap.
470 How to export seismic using a polygonal path.
471 How to export navigation data from 2D lines to a file in GeoFrame 3.7.
472 How to delete interpolated fault interpretation without deleting the seed picks.
473 How to delete Fault Contacts on Basemap.
474 How to post Surface Penetrations on an amplitude map.
475 How to associate a checkshot from one borehole to another.
476 How to change polarity of seismic while loading data.
477 How to change the color of the cursor location on the basemap in IESX.
478 How to apply a bulk shift to the checkshot.
479 How to change the color of the cursor location cross hair in GeoFrame.
480 How to uncompress and untar a remote backup disk file.
481 How to re-add IESX 10pX format DSL's to a project
482 How to launch an IESX Saved Session from a GeoFrame Xterm
483 How to dump a 16-bit integer header word.
484 A quick way to dump a 2D line that is many files into a tape.
485 Simplest method of dumping many consecutive 2d lines from one SEG-Y tape.
486 How to rename a fault boundary set in GeoFrame.
487 How to copy well data from IES to IESX.
488 How to select preferred log curve to post on seismic.
489 How can I make a copy of my fault boundary set?
490 How to patch an IESX 10 project when the application software is not installed.
491 How to skip traces during a seismic data load with the IES SKIPRANGE function.
492 How to reverse the current trace polarity using the IES INVERT function.
493 How to copy a horizon to another survey that has different line numbers.
494 How to post different amplitude attributes in different surveys at the same time.
495 How to make a smaller grid out of a larger grid.
496 How to import Seismic Loading Definitions from one project to another.
497 How to post different amplitude attributes in different surveys at the same time.
498 How to post log curves with duplicate codes at the same time in Seis3DV/2DV.
499 Assign a containing borehole to markers for a borehole chosen from BasemapPlus.
500 How can I get more User_layers to edit in Basemap?
501 How to import Colormap files from one project to another.
502 How to change the associated surface for a marker.
503 How to change the interpretation origin of a horizon.
504 How to rename a horizon attribute in GF3.7.
505 How to stretch and squeeze a synthetic in GeoFrame 3.7.
506 Merging interpretation between GeoFrame 3.6, GeoFrame 3.7 and GeoFrame 3.8
507 How to change the size of the Spectrum Bar.
508 How to transfer Borehole Sets between GeoFrame projects.
509 How to edit scatter set points in Basemap Plus.
510 How to move 2D lines from one survey to another
511 How to change the background of the wavelets & synthetics panel in Synthetics.
512 How to find an IPC adderss of a machine?
513 How to list all DSL's associated with a project, used and shared.
514 How to remove a fault boundary associated with a fault from display in basemap?
515 How to rename a survey description.
516 How to delete specific layers of culture
517 How to remove turning point annotation from a seismic traverse.
518 How to export traverse path locations (navigation) without generating 2D line.
519 How to load 3D without navigation.
520 How to delete all unassigned contacts.
521 How to load user defined increment of navigation from a SEGY file to a 2D line.
522 How to load selected lines from a 2D location data file.
523 How to smooth a grid in Mapview.
524 How to create markers from surface penetrations from a grid, horizon or fault.
525 How to create a grid using a horizon and markers together.
526 How to send Boreholes using the exclusion polygon option
527 How to determine the rotation of a 3D Survey.
528 How to transfer GeoFrame contour sets between projects.
529 How to export Well Symbol code from GeoFrame.
530 How to display data from two surveys continuously using a composite traverse.
531 Factors to consider when using BasicTD.
532 Is the Mapview Histogram/Delete functionality available in GeoFrame Basemap?
533 Change log trace scaling from linear to semi-log for curves in Seis3DV/2DV display.
534 How to add a borehole surface location in Lat/Longs.
535 How to load navigation from SEGY trace headers without loading every point.
536 How to change the look of a well symbol.
537 How to export Basemap Plus contours.
538 How to determine curve Measurement Type given a particular Array Code.
539 How to check what Unit Type corresponds with what Measurement Type.
540 How to normalize a survey with respect to another based on data in overlap zone.
541 How to run Z window edit.
542 How to change z_horizon_compute into Z so it will post on the seismic data?
543 SEGY file appears to have EOT after each line.
544 How to obtain basic reports on seismic lines.
545 How to make amplitude map of time slice.
546 How to remove the spectrum bar from display on basemap.
547 How to generate fault contacts with ASAP.
548 How to use auto contact generation in Seis%DV.
549 How to merge three surveys into one survey.
550 How to compute `dip' for an attribute other than Z (e.g. rms amplitude).
551 How to rename a traverse.
552 How to copy just the wells from a borehole set into another project.
553 How to insert pad traces between 2D lines?
554 How to load 3D survey with an SP increment of 0.5.
555 How to load ascii fault boundary file (xy coordinates) to CPS and then to GeoFrame?
556 How to change column width in the Data Manager tables.
557 How to rename a horizon attribute in IESX GeoFrame 3.7, 3.8.
558 How do I move seismic data between projects?
559 Set up hot keys globally in GF-IESX
560 Starting from the IESX Xterm command line when under an alternate license.
561 How to display a value stored in a seimc trace header location?
562 How to load synthetics in SEG-Y format in GeoFrame 3.8.
563 How to post multiple borehole synthetics on a seismic section.
564 How to setup the environment to run IESX in debug mode.
565 My IESX_CONFIG files are corrupt. How do I get a new default set?
566 I want to move my $IESX_CONFIG files to a new disk with more room. How do I do this?
567 How to rename Basemap user culture layers?
568 How to combine attributes to generate new attributes in GeoFrame 3.8.
569 How to import 3D horizon interpretation with user defined formats in GeoFrame 3.8.
570 How to post culture on SeisDV window - vertical or time slice display.
571 How to import a horizon attribute file.