Topic:
How to load log curves with uneven sample rate.

Description:
 

Solution:
1.) Session Manager > Application > IES Data Management*

2.) ADD data to project

3.) Add WELL data

4.) Read general CARD IMAGE INPUT

5.) DEFINE card image format

6.) Set the 'Sampling mode' to 'STEP', and the 'Samples per card' should be set
to the number of depth/value pairs on a single card.  So, for example:
---------1---------2---------3---------4
	depth	value	depth	value
	5000.0	150.0	5001.0	152.0
	5003.5	151.0	5006.0	148.0
	5007.0	149.6	5008.3	149.0
The samples per card in this case would be 2.

If, however, the ASCII file is in GQS format (#4 above should be 'Read GEOQUEST
CARD IMAGE input from TAPE/DISK'), then the 'Values per Card' field should be
set to the total number of columns you are reading, in the example above, 4.
And the format defined in the ASCII file would be (8X,F6.1,F7.1)



* IES Data Management is not a Motif-based application.  Therefore you will use
   arrow keys and the Return key on your keyboard rather than the mouse.
 . To move across a screen and toggle through options, use the left and right
   arrow keys
 . To activate your selection(s) and return to the preceding screen, move the
   cursor to EXIT and press Return on your keyboard.
 . To return to the preceding screen without activating your selection(s), move
   the cursor to QUIT and press Return on your keyboard.




Last Modified on: 19-NOV-98