Topic:
How to produce a scaled plot of logs from a single well.

Description:
 

Solution:
1.) LPView > Log Analysis #3 (PetroView) A PetroView license is required to do
 this (seperate license than LPView).

2.) Scaled Log Display #8 > Display Log Suite #1

3.) Parameter File #1, uses saved parameter files from a previous setup.

4.) Interactive #2 > Parameters #1 > Menu options 1-2 set the beginning and
 ending depth range, option 3 will interpolate across NILL areas if (yes),
 option 4 sets the log scale (in/100 ft/m), option 5 sets the number of log
 tracks, option six is the display type, option 7 sets the track width in
 inches, and option 8 sets the depth track in inches.

5.) Curves #2, select the curves for display > Curve Scales #3, allows you to
 set the curve scales, semilog setting, color, track number, line type, and line
 weight (use the arrow keys to move around).

6.) Symbols Annotation #4, allows you the option to select a well symbol for
 dislay along with the formation type and KB depth.

7.) Tops Annotation #5, select formation tops to be displayed.

8.) Enter Text #6, text for scaled display only > Setup Fill Paterns #7 > Add
 Pattern #1, gives you three options, Fill Between two curves 2nd curve greater
 than 1st - Fill above curve to top of grid - Fill below curve to base of grid,
 you can also modify the pattern after defining it.

9.) Screen Display #8, displays to screen only > Scaled Display #9 plots to a
 plotter.



Last Modified on: 01-SEP-98