Topic:
How to create a clone of an IESX 10pX project.

Description:

Solution:
1.) Create a new project with the same parameters as the seismic project.
 
    - Session Manager > Project > Create.
    - Type in project name and password.
    - Select disk space from Available data storage locations, select Create.
    - Select Projection, Spheriod and units.  Be sure these match the ones
        in the original project.
    - Select OK.
 
 
2.) Share the seismic from the seismic project.
 
    - DataManager > Seismic > Share.
    - Select Project and volume.
    - Select Share.
    - Select Dismiss.
 
 
3.) Merge interpretation.
 
    - DataManager> Interpretation > Merge. 
    - Select source project(seismic project)/survey.
    - Select same destination survey.
    - Select all horizons/faults/contacts/fault traces/unassigned contacts 
         and attributes.
    - Select Merge.
 
 
4.) Geoshare wells from seismic project to new project in Geonet/Geoshare.
   
    - Select from IESX-10p2 to IESX-10p2 > Start transfer.
    - In 'Prompts for IESX-10p2 receiver' input project name and password. 
          (type in password, do not swipe), then select OK.
    - Select Project and input password, then select Proceed.
    - Select Manage under Well Data option.
    - Select the 'Select Everything' option, select Apply, then OK.
    - Select Send on next menu and geoshare is in progress.
 
  Note - If you have a large number of wells this can take a long time.
 
 
5.) OPTIONAL: Copy mapview files from the seismic project to the new project.
 
    - Find the project directory. 
        - Session Manager > Project > Update.
        - Select project. 
        - The first dsl listed in the "Disk space(Kbytes) Selected data 
            storage locations"is the project directory of the project.
    - cd to that project directory. 
    - Copy mapview files: >cp *xyz *ctr *grd  to new project directory/.
    - Do a rebuild in IES Data Management:       
         - ADD data to project > Add Data in IES format >
           Create a NEW PROJECT INVENTORY
          - Set the next menu as follows:
              1 - Rebuild inventory              (YES, NO)        YES
              2 - Confirm recovery               (YES, NO)        NO
              3 - Disposition of old inventory   (RENAME, DELETE) RENAME
              4 - Restore LDB files    (NONE, PATH, ADD, REBUILD) REBUILD
              5 - Restore MAPLOC files (NONE, PATH, REBUILD)      REBUILD
 
   e) Select EXIT three times to start process.
        (The warning message does not apply to IESX.)
 
   f) Exit all the way out of IES DataManagement.
 
   g) Continue.
 
 
You can now do MapView work in the clone while you load seismic data in
    the original project





Last Modified on: 28-APR-00