Topic:
How to add more disk space to a project.

Description:

Solution:
 1.) From IESX Session Manager > Project > Update
     Select Project, enter password
 2.) Add more DLS's to the project by clicking on disk(s) from the lower list :
     'Disk space (Kbytes) Available data storage locations' 
 3.) Selected disks will appear in the upper list :
     'Disk space (Kbytes) Selection data storage locations' 
 3.) Click 'Update'
 4.) Dismiss the 'Update Complete' message
 5.) Click on Interp or Seismic DSL's button,depending on whether space is
     needed for Seismic or Interpretation,or both.
 6.) Select DSL's from top list as required :
     'DSL's associated with project'
 7.) DSL's will be copied to the bottom of the lower list :
     'Ordered DSLs'
 8.) Reorder DSL's as required using the Top/Bottom/Move buttons.
 9.) Remove any DSL's from the bottom list that no further data should be 
     written to.
     The 'Delete' button will only delete DSL's from the 'Ordered DSL list',
     not from 'the DSL's associated with the project' list. 
10.) Change spanning criteria as required
11.) Click 'Update' 
12.) Dismiss the 'Update Complete' message
13.) Dismiss from the 'Update Project' menu - do not 'Update' again as this
     will reset the Interp and Seismic DSL's to the default.

Default selection for 'Ordered DSLS's' is all 'DSL's associated with project'
except the 'home' DSL which is the first in the list.


 * For information on defining DSL's in IESX and adding them to a user, see:
    Product:IESX, Application: Administration
    HowTo: How to add a new disk or tape drive to IESX 10pX.
    HowTo: How to add DSLs (disk storage locations) to a user.
    

Note: You can also move interpretation and seismic volumes to other disks
assigned to the project in DataManager > Utilities > Move.




Last Modified on: 28-SEP-98