Topic:
How to change the well in Synthetics by selecting it from the Basemap.

Description:

Solution:
1.) Open up a synthetics menu and a basemap menu:  Session Manager > Application 
> Synthetics and Session Manager > Application > Interpretation > Basemap

2.) Make sure the dynamics are open in Synthetics and Basemap:  In Synthetics,  
Parameters > Dynamics, set 'Well selection' Recv on.  In Basemap, Parameters > 
Dynamics, set 'Well selection' Send on.

3.) Post the well set in Basemap: Post > Wells.  Select a well set and an 
appearance set, click the down arrow and click the 'Ok' button.

4.) Select the well from the Basemap: Mode > Well select.  Move the cursor on 
the basemap to the desired well, and the well will highlight.  Click on MB1 
after the desired well highlights.  You will receive a message from the 
synthetic window 'Changing well without saving synthetic data!  Continue?'.  
Make the confirmation and the newly selected well will display in synthetics.  (Note: If you confirm with a 'Yes' your synthetic data currently displayed will not be saved.  If you confirm with a 'No', the 'Save synthetic data' menu will open, allowing you to save the desired data and then change the well.)




Last Modified on: 11-NOV-98