Topic:
How to make a copy of a checkshot within IESX.

Description:
This checkshot can be associated with a different well from the checkshot it was
copied from while creating it.

Solution:
1.) Launch DVT management from IESX DataManager > Wells > Time/Depth.

2.) Click on the existing checkshot you want to copy.
That checkshot is highlighted in the Select relation box and the name appears in
the Relation name box. The values are listed in the lower left box.

3.) Click on the highlighted checkshot in the Select relation box to deselect
it. It is no longer highlighted, Relation name box is blank, but the values
remain in the lower left box. The well associated with the checkshot is still
the same.

4.) Type in a new name in the Relation name box. 

5.) Click on Associated Well and select the well to associate with this
checkshot. It can be the same well if so required.

6.) Click on create and a new DVT (Checkshot) is created with the new name but
has the same values of the checkshot selected to copy from.

Note: Any of the other parameters can be changed before creating this checkshot
as well such as Depth reference elevation, time reference elevation, units, etc.



Last Modified on: 08-DEC-98