Topic:
How to create a DT curve from a resistivity curve.

Description:
     

Solution:
In LPView:

#5) Change Default well

	Set this to the well you want to work on by either clicking on it with
	MB1 or use the down arrow to it and hit enter.  Then exit.

#2) Log Preparation ->

	#5) compute pseudo log

		Next a list of the conversion types come up.
		Pick the appropriate conversion.
		In this case #5 or #6
	
		1) parameters

			Here the defaults are set to the full depth of
			the log.  You can leave them and exit, or edit
			them to your desired setting.

		2) Change Curves

			If you have more than one resistivity curve
			select the one you want to compute from here.
			If you only have one, it will default to it.

		3) Compute/Display
			
			This will post both your resistivity curve and 
			your new DT curve.  If you like it choose:

			5) Save Data then 1) Save Data
			
				Hit enter to accept or press Q to avoid 
				saving the well.



Note:

In this example when you go to save the log it will save it as

DT from RES.
				




Last Modified on: 03-MAY-00