Topic:
How to associate a checkshot from one borehole to another.

Description:
In IESX, you can associate any checkshot in the project to any well.        

Solution:
1. In the Wells and Boreholes Data Manager (Application
Manager>Managers>Data>Wells and Boreholes) place the desired borehole in the
table and highlight it (click on boreholes..., highlight the borehole from the
list>ok.  The borehole is now in the table, click on it to highlight it and
click the blue "i" (information) icon above the table.

2. In the Borehole Editor under Survey Preferences click on checkshots.

3. The open window is labeled: "select preferred checkshot survey".  Near the
bottom of the window there is a gray button "show checkshots in" followed by a
toggle: this borehole, this well, this field, this project.  If you don't know
where the checkshot is, select "this project", then click the gray button "show
checkshots in".  Choose the desired checkshot from the available list>ok.  This
newly selected checkshot becomes the preferred checkshot for this borehole.  You
may change the preferred checkshot for a borehole at any time from the Project's
Borehole Data Manager under "set preferred checkshot". 



Last Modified on: 22-JUL-00