Topic:
How to copy just the wells from a borehole set into another project.

Description:
Project A has a total of 6000 wells, and a borehole set contains just 250 of
those wells. How to get the borehole set into project B.

Solution:
1. While in Project A, bring up General Data Manager, and open the ITC door
   icon in the lower right corner of the window.

2. On BaseMap, Post>Boreholes Sets>and select only the borehole set you wish to
   copy.

3. On Basemap, Send>Boreholes. Click MB3 and toggle Incllusive Polygon on (red).

4. Click MB1 to draw a polygon around all the wells you have posted, click
   MB3>Break to close the polygon. All the wells should now have changed color      to yellow.

5. Click on the ITC broadcast icon on the lower right hand corner of the
   basemap, the wells highlighted on basemap should now be populated to the
   General Data Manager.

6. Select File>Data copier in General Data Manager window, choose project B
   as the target project which the boreholes need to copy to.

 



Last Modified on: 27-DEC-00