#======================================================================

#                    T I M E _ S E R I E S . P L 

#                    doc: Sun May 23 16:40:53 2010

#                    (c) 2010 A.M. Thurnherr

#======================================================================

# HISTORY:

#	May 23, 2010: - created from [perl-tools/RDI_Utils.pl]

#	Oct 20, 2010: - disabled max_gap profile-restarting code

#	Dec 17, 2010: - re-added {DEPTH} field to ensembles

#	Dec 18, 2010: - max gap re-enabled

#	Dec 20, 2010: - cosmetics

#	Jul  2, 2011: - tightened gap-detection code

#	Jul  4, 2011: - added support for $skip_ens

#	Oct 11, 2011: - BUG: {DEPTH} had not been set at start of profile

#	Oct 12, 2011: - re-worked ref_lr_w()

#				  - stopped depth integration across gaps >= 5s

#	Apr 17, 2013: - improved gap message (added ensemble range)

#	Nov 27, 2017: - BUG: gap heuristic could not deal with P06#001

#				  - BUG: gap heuristic could not deal with P06#025

#	May  1, 2018: - added reflr u and v calculations

#				  - BUG: reflr u and v calcs did not work

# NOTES:

#	- resulting DEPTH field based on integrated w without any sound speed correction

#	- single-ping ensembles assumed, i.e. no percent-good tests applied

#	- specified bin numbers are 1-relative

#----------------------------------------------------------------------

# Reference-Layer Velocities

#----------------------------------------------------------------------

sub ref_lr_w($$$$)										# calc ref-layer vert vels

{

	my($dta,$ens,$rl_b0,$rl_b1) = @_;

	my(@w);

	for (my($bin)=$rl_b0-1; $bin<=$rl_b1-1; $bin++) {

		push(@w,$dta->{ENSEMBLE}[$ens]->{W}[$bin])

			if defined($dta->{ENSEMBLE}[$ens]->{W}[$bin]);

	}

	return unless (@w);

	$dta->{ENSEMBLE}[$ens]->{REFLR_W} = avg(@w);

	$dta->{ENSEMBLE}[$ens]->{REFLR_W_STDDEV} = stddev2($dta->{ENSEMBLE}[$ens]->{REFLR_W},@w);

	$dta->{ENSEMBLE}[$ens]->{REFLR_W_NSAMP} = @w;

}

sub ref_lr_uv($$$$)										# calc ref-layer horiz vels

{

	my($dta,$ens,$rl_b0,$rl_b1) = @_;

	my(@u,@v);

	for (my($bin)=$rl_b0-1; $bin<=$rl_b1-1; $bin++) {

		next unless defined($dta->{ENSEMBLE}[$ens]->{U}[$bin]);

		die unless numbersp($dta->{ENSEMBLE}[$ens]->{U}[$bin],$dta->{ENSEMBLE}[$ens]->{V}[$bin]);

		push(@u,$dta->{ENSEMBLE}[$ens]->{U}[$bin]);

		push(@v,$dta->{ENSEMBLE}[$ens]->{V}[$bin]);

	}

	return unless (@u);

	$dta->{ENSEMBLE}[$ens]->{REFLR_U} = avg(@u); $dta->{ENSEMBLE}[$ens]->{REFLR_V} = avg(@v);

	$dta->{ENSEMBLE}[$ens]->{REFLR_UV_NSAMP} = @u;

}

#======================================================================

# ($firstgood,$lastgood,$atbottom,$w_gap_time) =

#	calcLADCPts($dta,$skip_ens,$lr_b0,$lr_b1,$min_corr,$max_e,$max_gap);

#======================================================================

sub calcLADCPts($$$$)

{

	my($dta,$skip_ens,$rl_b0,$rl_b1,$max_gap) = @_;

	my($firstgood,$lastgood,$atbottom,$w_gap_time,$max_depth);

	for (my($depth)=0,my($e)=$skip_ens; $e<=$#{$dta->{ENSEMBLE}}; $e++) {

		ref_lr_w($dta,$e,$rl_b0,$rl_b1);

		if (defined($firstgood)) {

			$dta->{ENSEMBLE}[$e]->{ELAPSED} =				# time since start

				$dta->{ENSEMBLE}[$e]->{UNIX_TIME} -

				$dta->{ENSEMBLE}[$firstgood]->{UNIX_TIME};

		} else {

			if (defined($dta->{ENSEMBLE}[$e]->{REFLR_W})) {		# start of prof.

				$firstgood = $lastgood = $e;		    

				$dta->{ENSEMBLE}[$e]->{ELAPSED} = 0;

				$dta->{ENSEMBLE}[$e]->{DEPTH} = $depth;

			}

			next;

		}

		unless (defined($dta->{ENSEMBLE}[$e]->{REFLR_W})) {				# gap

			$w_gap_time += $dta->{ENSEMBLE}[$e]->{UNIX_TIME} -

						   $dta->{ENSEMBLE}[$e-1]->{UNIX_TIME};

			next;

		}

		my($dt) = $dta->{ENSEMBLE}[$e]->{UNIX_TIME} -		# time step since

				  $dta->{ENSEMBLE}[$lastgood]->{UNIX_TIME}; # ... last good ens

		if ($dt > $max_gap) {

			if (($max_depth>50 && abs($depth)<0.1*$max_depth) &&					# looks like a profile

				(@{$dta->{ENSEMBLE}}-$e < 0.25*@{$dta->{ENSEMBLE}})) {				# in the final quartile of the data

					warning(1,"long gap (%ds) after likely profile (0->%d->%dm) --- finishing at ens#$dta->{ENSEMBLE}[$e]->{NUMBER}\n",

						$dt,$max_depth,$depth);

					last;				

            } elsif ((abs($depth) < 10) ||											# shallow gap at the beginning

            		 ($depth == $max_depth)) {										# biased in-air data

						$firstgood = $lastgood = $e;

						undef($atbottom); undef($max_depth);

						$depth = 0;

						$dta->{ENSEMBLE}[$e]->{ELAPSED} = 0;

						$dta->{ENSEMBLE}[$e]->{DEPTH} = $depth;

						$w_gap_time = 0;

						next;

			}

			if ($dta->{ENSEMBLE}[$e]->{ELAPSED} < 200) {

				warning(1,"long gap (%ds) at ensembles #$dta->{ENSEMBLE}[$lastgood]->{NUMBER}-$dta->{ENSEMBLE}[$e]->{NUMBER}, %ds into the profile\n",

					$dt,$dta->{ENSEMBLE}[$e]->{ELAPSED});

			} else {

				warning(1,"long gap (%ds) at ensembles #$dta->{ENSEMBLE}[$lastgood]->{NUMBER}-$dta->{ENSEMBLE}[$e]->{NUMBER}, %.1fmin into the profile\n",

					$dt,$dta->{ENSEMBLE}[$e]->{ELAPSED}/60);

			}

		}

		$depth += $dta->{ENSEMBLE}[$lastgood]->{REFLR_W} * $dt			# integrate

			if ($dt < 5);

		$dta->{ENSEMBLE}[$e]->{DEPTH} = $depth;

		$atbottom = $e, $max_depth = $depth if ($depth > $max_depth); 

		$lastgood = $e;

	}

	for (my($e)=$firstgood; $e<=$lastgood; $e++) {						# calculate u and v

		ref_lr_uv($dta,$e,$rl_b0,$rl_b1);

	}

	return ($firstgood,$lastgood,$atbottom,$w_gap_time);

}

#----------------------------------------------------------------------

1;